Page 2
Power issues 5 Fans and lights issues 5 Door issues 7 Sound insulation issues 8 Did not find what you were looking for? Please use the SILENT ROOM Technical guide to find the assembly instructions and operating instructions: instructions.narbutas.com/Silent_room_technical_guide.pdf ->...
Page 3
SILENT ROOM | Read me first Safety This is a short overview of the key safety guidelines. For more information please carefully read User manual -> ∙ ∙ The pod is designed for indoor use only, where the Connect the power cord to a properly grounded outlet humidity level is lower than 60%.
Page 4
SILENT ROOM | Control box layout Control box layout Control box is located behind the opening lid of internal front central wall. Input for the electrical system: 100-240 VAC, 50-60Hz. Power ON/OFF switch is on the top left side. Every electric device is powered via this controller.
Page 5
Fans and lights issues Lights and (or) ventilation are not working (power outlet is working) Check DIP switch (see control box layout f). Depending on the SILENT ROOM model, it should be adjusted as follows: SILENT ROOM S SILENT ROOM M...
Page 6
(see control box layout j). ventilation connection picture). Unscrew the M4x10 (4 pcs.) and Check if connectors are securely Contact NARBUTAS support if the take out the fan module. connected. replacement part is required. If all of the above are correctly connected it is likely that there is an issue with the fan itself.
Page 7
(see control box layout h,i). Press and hold the RESET button for 2 sec. (see Contact NARBUTAS support if the replacement part is control box layout d). required. See dimming controller replacement instruction here: instructions.narbutas.com/var/docs/M60ES126.pdf ->...
Page 8
The top of the ceiling will be visible about 3 mm. 3 mm Check if there are no gaps between ceiling modules. Applicable only for SILENT ROOM M, L and XL. Sound leakage from the door Check if the door fits evenly to the sealing gasket.
Need help?
Do you have a question about the SILENT ROOM and is the answer not in the manual?
Questions and answers