adairs ANJUNA Assembly Instructions

Bedside table 1 door

ASSEMBLY INSTRUCTIONS

ANJUNA BEDSIDE TABLE 1 DOOR

________________________________________________________________________________________

Please read instructions carefully. Remove all wrapping material, staples and packing straps from the carton. See Hardware and

Furniture Parts List for guidance. Be sure you have all parts before you start assembling. Place all wooden furniture parts on a clean

and flat soft surface, such as carpet or rug to prevent from being scratched.

-First, check the content to make sure that nothing is missing.

-Sort out the parts and fittings as shown, assemble product step by step.

-It is preferable to rest the product on a soft surface to avoid damage during assembly. Two people

are needed to turn this unit upside down, please take care whilst doing this.

-Do not over tighten screws and fittings.

-Re-tighten all screws and fittings periodically.

www.adairs.com.au

www.adairs.co.nz

PARTS INCLUDED

TOP

LEG

ALLEN KEY

BOLT

C. WASHER

Page 1 of 2

1 Pc

2 Pcs

6 Pcs

Table of Contents

Do you have a question about the ANJUNA and is the answer not in the manual?

Page 1 ASSEMBLY INSTRUCTIONS ANJUNA BEDSIDE TABLE 1 DOOR ________________________________________________________________________________________ Please read instructions carefully. Remove all wrapping material, staples and packing straps from the carton. See Hardware and Furniture Parts List for guidance. Be sure you have all parts before you start assembling. Place all wooden furniture parts on a clean and flat soft surface, such as carpet or rug to prevent from being scratched.
Page 2 On a soft surface, such as a rug, turn the bedside upside down Align the 2 legs with the pre-drilled holes STEP 2 STEP 3 Tight all the screws Turn the unit upside down. Your product is ready to use www.adairs.com.au www.adairs.co.nz Page 2 of 2...