General - Samsung RB44TS Series User Manual

General

Temperature
Symptom
Fridge/freezer does
not operate.
Fridge/freezer
temperature is warm.
Fridge/freezer is
over-cooling.
Exterior wall is hot.
Possible causes
Power cord is not plugged
in properly.
Temperature control is not
set correctly.
Refrigerator is located
near a heat source or
direct sunlight.
Not enough clearance
between refrigerator and
sides/rear.
The refrigerator is
overloaded. Food is
blocking the refrigerator
vents.
Temperature control is not
set correctly.
Refrigerator has hot pipe
in the exterior wall.
Solution
Properly plug in the power
cord.
Set the temperature lower.
Keep the refrigerator away
from direct sunlight or a heat
source.
We recommend that the gap
between the refrigerator and
nearby walls (or cabinets) is
more than 50 mm.
Do not overload the
refrigerator. Do not allow
food to block ventilation.
Set the temperature higher.
To prevent condensation,
the refrigerator has hot pipe
in the front and side walls.
If the ambient temperature
rises, this equipment may
produce more heat. This is
not a system failure.
English 47