Troubleshooting; Errors (Internal Display) - Samsung RB44TS Series User Manual

Troubleshooting

Before calling for service, review the checkpoints below. Any service calls regarding
normal situations (No Defect Cases) will be charged to users.

Errors (Internal display)

Your fridge - freezer will warn you if the temperatures for the
are at improper levels or if a problem occurs with the appliance. Warning codes are
displayed in the freezer and
ERROR
MEANING
TYPE
Sensor warning
E01
E02 Sensor warning
E03 Sensor warning
E06 Sensor warning
E07 Sensor warning
Low Voltage
E08
Warning
Freezer
compartment is
E09
not cold enough
fridge indicators.
WHY
Power supply to
the device has
dropped to below
170 V.
Likely to occur
after long term
power failure.
fridge and freezer
WHAT TO DO
Call Service for assistance as soon
as possible.
Call Service for assistance as soon
as possible.
Call Service for assistance as soon
as possible.
Call Service for assistance as soon
as possible.
Call Service for assistance as soon
as possible.
- This is not a device failure, this
error helps to prevent damages
to the compressor.
- The voltage needs to be
increased back to required levels
If this warning continues an
authorised technician needs to be
contacted.
1. Set the freezer temperature
to a colder value or set Super
Freeze. This should remove the
error code once the required
temperature has been reached.
Keep doors closed to improve
time taken to reach the correct
temperature.
2. Remove any products which
have thawed/defrosted during
this error. They can be used
within a short period of time.
3. Do not add any fresh produce
to the freezer compartment
until the correct temperature
has been reached and the error
is no longer.
If this warning continues an
authorised technician needs to be
contacted.
English 45