Maintenance; Recommended Maintenance Schedule(S); Pre-Maintenance Procedures; Accessing The Batteries - Toro eS3000SD 72V Manual

Maintenance

Note:
Determine the left and right sides of the machine from the normal operating position.

Recommended Maintenance Schedule(s)

Maintenance Service
Interval
Before each use or daily
After each use
Every 25 hours
Before storage
Monthly
Every 2 months
CAUTION
If you leave the key in the switch, someone could accidently start the machine and seriously
injure you or other bystanders.
Shut off the machine and remove the key from the switch before you perform any maintenance.

Pre-Maintenance Procedures

Accessing the Batteries

1. Park the machine on a level surface, disengage
the blade-control switch, and engage the parking
brake.
2. Shut off the machine and remove the key.
3. Tilt the seat forward.
Figure 17
Maintenance Procedure
• Check the safety-interlock system.
• Charge the batteries.
• Inspect the blades.
• Clean the mower-deck housing.
• Grease the front wheel bearings.
• Clean the batteries.
• Check the tire pressure.
• Perform all maintenance procedures listed above before storage.
• Paint any chipped surfaces.
• Check for battery leaks.
• Charge the batteries when not in use.
g358655
4. Move the height-of-cut lever to the middle
position and remove the handle.
22
Figure 18
g358658