Advertisement
Channel 4 (Channel 3 input on KB-75) Low-Impedance Input (8)
For use with low-impedance microphones or other line-level sources equipped with a male XLR
connector.
Channel 4 (Channel 3 input on KB-75) Send/Return Jack (9 & 10)
This pair of 1/4" jacks allows the use of various auxiliary units (effects units‚ equalizers‚ etc.) in-
line.
Channel 3‚ 2 & 1 (Channel 2 & 1 on KB-75) Inputs (11‚ 12 & 13)
This pair of 1/4" jacks accepts high-impedance microphones or line-level sources equipped with
left and right 1/4" phone plugs.
External Speaker Jack (14)
This 1/4" jack provides the powered signal from the amplifier. Use this jack to add a second
speaker cabinet in parallel. The external minimum speaker load impedance is 8 ohms.
IEC connector/detachable line cord (15)
This is a standard IEC power connector. An AC mains cord having the appropriate AC plug and
ratings for the intended operating voltage is included in the carton. The mains cord should be
connected to the amplifier before connecting to a suitable AC outlet.
KB-75 150.indd
6
2009-6-24
16:42:40
Advertisement
