Table of Contents
Advertisement
POWER UP
1. With the cover/stand closed, insert two AAA batteries (not included) into
the back of projection alarm. Observe correct polarity.
2. Firmly pull the cover/stand open from the top to view the clock.
3. Optional Micro-USB power cable (included) for constant, adjustable
backlight and projection. Insert the Micro-USB end of the cable into the
clock and the USB end into your computer USB port or a USB outlet.
Restart:
Unplug the Micro-USB cable and remove batteries from the
projection alarm, press any button 20 times. After 15 minutes, return to
Step 1 above.
Pull firmly to open
clock cover.
Micro-USB Port
(Clock Power)
Standard USB Port
(Charge Mobile Devices)
Foldout Cover/Stand
2
Advertisement
Table of Contents
