Table of Contents
Advertisement
User's Manual
BEST
The feedback control panel can show two tabs:
• The statistics section tab (
the beam position (X-Y) and of the beam intensity (I
standard deviation are visualized;
• The control section tab (
control input/output parameters.
The statistics section tab reports mean values and standard deviations of X, Y and
intensity (I0) of the BPM data at the maximum sampling frequency (100 kHz). The
standard deviation of X, Y and I0 at 100 Hz (average of 1000 samples) is also
reported.
In this example one TetrAMM (BPM1) is connected to the Central Unit.
Figure 20
27
Figure 19
Figure 21
Figure 19: Feedback statistics section.
Heartbeat, Enable/Disable Feedback and Reset controller
:
), where the real-time mean value of
), which groups all the main feedback
BEST Local GUI
) and its related
0
Advertisement
Table of Contents
