Pack the unit securely (preferably in the Incorrect installation or use can cause serious damage original packing material), and return it to your Prolight to people and/or property. dealer for service. www.prolight.co.uk Evora 740ZP Zoom Wash User Manual...
Page 3
To avoid damage to internal parts ie. optics, motors, belts, wiring or LEDs never expose the front lens to direct sunlight, lighting fixtures or lasers even when the fixture is not in use. www.prolight.co.uk Evora 740ZP Zoom Wash User Manual...
Page 4
• 6 push button menu with 1.8” LCD display • Display battery backup for offline configuration 4844 1211 • Supplied with quick release omega clamps • USB port (firmware updates) 4° 31° • Temperature controlled fan www.prolight.co.uk Evora 740ZP Zoom Wash User Manual...
Always use a safety wire as an extra safety precaution to prevent damage/injury in the event a clamp fails (see the next page for clamp installation). Never use the carry handles for secondary attachments. www.prolight.co.uk Evora 740ZP Zoom Wash User Manual...
Page 8
4. Mount the fixture onto your truss system via the clamps and tighten to ensure secure. 5. Pull the safety cable through the safety cable holes located on the metal base plate on the underside of the fixture and around the truss. www.prolight.co.uk Evora 740ZP Zoom Wash User Manual...
Page 9
The LCD control panel situated on the front of the fixture allows the user to access the menu system to adjust the fixtures settings. When the unit has been powered on the display will show “Software Update” followed by “eLumen8 Evora 740ZP” and then “Please Wait...” followed by “Motor Reset Please Wait...”. The fixture will then return to its home screen.
Page 10
W-DMX must be active for Link all devices and the link Tx/Rx Link with a transmitter must be suspended (Receive Reset) UnLink Unlink all devices Do not suspend link with transmitter Rx Reset Suspend link with transmitter www.prolight.co.uk Evora 740ZP Zoom Wash User Manual...
Page 11
LCD Display Inverse Setting Control Panel Lock Setting Display Key Lock (Press and hold MODE Service for 3 seconds to unlock) Display Flash Setting DispFlash When No DMX Signal Power Saver Hibernation Hibernation Setting 01M-099M www.prolight.co.uk Evora 740ZP Zoom Wash User Manual...
Page 12
LED Refresh Rate Setting 2500Hz 4000Hz 5000Hz 10kHz 15kHz 20kHz 25kHz Pan Inverse Pan Inverse Setting Pan/Tilt Tilt Inverse Tilt Inverse Setting Pan Angle Pan Angle setting Auto Fans Head Fan Head Fan Speed Setting High www.prolight.co.uk Evora 740ZP Zoom Wash User Manual...
Page 13
Information Model eLumen8 Evora 740ZP Model Information RDM UID 0x09A5-xxxxxxxx RDM UID 1U: Vx.x.xx 2U: Vx.x.xx Firmware Software Version 3U: Vx.x.xx 4U: Vx.x.xx Error. Info NONE/Pan, Tilt... (See page 11) Current Fixture Errors www.prolight.co.uk Evora 740ZP Zoom Wash User Manual...
Page 14
Show 2 (pixel effects) 101-150 Show 3 151-200 Show 4 (forward facing) 201-255 Show 5 (forward facing with pixel effects) 000-255 Show speed (slow-fast) 000-255 Show fade (min-max) 000-034 1800K 6000K 6500K 12850K www.prolight.co.uk Evora 740ZP Zoom Wash User Manual...
Page 15
Gold Amber (LEE 021) 71-72 Millennium Gold (LEE 778) 73-74 Deep Golden Amber (LEE 135) 75-76 Flame Red (LEE 164) 77-78 Red Magenta (LEE 113) 79-80 Medium Lavender (LEE 343) 81-82 Pure White (White LEDs only) www.prolight.co.uk Evora 740ZP Zoom Wash User Manual...
Page 16
Green dimmer 4 (0-100%) 000-255 Blue dimmer 4 (0-100%) 000-255 White dimmer 4 (0-100%) 000-255 Red dimmer 5 (0-100%) 000-255 Green dimmer 5 (0-100%) 000-255 Blue dimmer 5 (0-100%) 000-255 White dimmer 5 (0-100%) www.prolight.co.uk Evora 740ZP Zoom Wash User Manual...
Page 17
Inverse Square Law 192-255 S-curve Dimming Modes 0-20 Standard dimming mode 21-40 Stage dimming mode 41-60 TV dimming mode 61-80 Architectural dimming mode 81-100 Theatre dimming mode 101-255 Default dimming mode (set on fixture) www.prolight.co.uk Evora 740ZP Zoom Wash User Manual...
Page 18
20kHz (hold 3s) 193-200 25kHz (hold 3s) 201-208 Reset pan/tilt (hold 3s) 209-216 Reset head only (hold 3s) 217-224 Reset all motors (hold 3s) 225-232 KlingNet disable 233-240 KlingNet enable 241-255 No function www.prolight.co.uk Evora 740ZP Zoom Wash User Manual...
3-Pin: CABL10 – 2m CABL11 – 5m CABL12 – 10m 5-Pin: CABL185 – 2m CABL187 – 5m CABL188 – 10m Also remember that DMX cable must be daisy chained and cannot be split. www.prolight.co.uk Evora 740ZP Zoom Wash User Manual...
Page 21
3-pin XLR (female) Pin 1: GND (screen) Pin 1: GND (screen) Pin 2: Signal (-) Pin 2: Signal (-) Pin 3: Signal (+) Pin 3: Signal (+) Pin 4: N/C Pin 5: N/C www.prolight.co.uk Evora 740ZP Zoom Wash User Manual...
Page 22
Please note: Caution should be used when power linking other fixtures to the Evora 740ZP Zoom Wash as the power consumption of other fixtures will vary. Fixtures fitted with lamps often require 2/3 times more current on startup, these may require their own power source.
Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal. www.prolight.co.uk Evora 740ZP Zoom Wash User Manual...
Need help?
Do you have a question about the Evora 740ZP Zoom Wash and is the answer not in the manual?
Questions and answers