ZKTeco VE08A01 Installation Instructions Manual

MULTI-USER DIRECT PRESS
VISUAL INTERCOM DOORBELL
Installation instruction manual
Ⅰ.PRODUCT DESCRIPTION
Product introduction
This set of products is a color wired multi household intercom visual doorbell. The system consists
of outdoor unit and indoor unit. The indoor unit is powered by network cable to realize door bell call,
monitoring intercom, remote unlocking and network cable connection.
The display screen adopts LCD, the image is clear and transparent, and the color is gorgeous without
distortion. The camera adopts CMOS HD camera. The outdoor unit can swipe ID card to open the door.
In case of insufficient outdoor light, it will automatically start infrared night vision lighting.
One key is correspondingly connected to an indoor unit. The outdoor host needs 12-15v separate power
supply, and the indoor unit displays.
The panel needs 12-15v power supply (it is recommended to use super class V or super class VI network
cable for connection, 2 cores and 1 core) and the maximum service distance is 150m.
Ⅱ.PRODUCT INTRODUCTION
Color LCD
Microphone
Mute
Adjust the volume of music
& replace the ring tone
Monitor
Unlock
Talk
1
2
3
4
5
6
Ⅲ.PARAMETERS OF INDOOR UNIT
Indoor unit
Screen 7-inch TFT LCD
Resolving power 800*480
Texture of material ABS engineering plastics
Power Standby: ≤ 1W working: ≤ 10W
Current voltage 12-15V 1.2A
Working temperature -20℃~60℃
Monitoring time 90 seconds
Intercom time 90 seconds
Call ringtone 25 songs
Installation mode Wall hanging
Signal interface 5P x 2.54
Connects with an outdoor unit
Intercom volume adjustment
D C 15V power interface
Adjust brightness
Adjust color
Connects with next indoor unit
1
Camera
2
Infrared night light
3
Speaker
7
4
Calling button
5
Card swiping area
6
Microphone
7
Lens direction adjustment area
8
Electronic lock signal interface
8
Outdoor unit
Camera CMOS HD camera
Texture of material aluminium alloy
Card type Number of ID cards: 500
Night vision distance 0.2-1m
Power Supply Special power adapter power supply DC15V
power Standby: ≤ 0W working: ≤ 2W
Camera angle 82°
Degree of protection IP54
Unlock signal Voltage signal
Working temperature -20℃~60℃
Installation mode Embedded installation
Signal interface 5P x 2.54