Advertisement
Quick Links
User Manual
SLK20S
Date: April 2020
Doc Version: 1.0
English
Thank you for choosing our product. Please read the instructions carefully
before operation. Follow these instructions to ensure that the product is
functioning properly. The images shown in this manual are for illustrative
purposes only.
For fur ther details, please visit our Company 's website
www.zkteco.com.
Advertisement
Related Manuals for ZKTeco SLK20S
Summary of Contents for ZKTeco SLK20S
- Page 1 User Manual SLK20S Date: April 2020 Doc Version: 1.0 English Thank you for choosing our product. Please read the instructions carefully before operation. Follow these instructions to ensure that the product is functioning properly. The images shown in this manual are for illustrative purposes only.
- Page 2 Overview SLK20S is an enhanced version of SLK20M fingerprint module. It supports large capacity fingerprint acquisition module with an extended feature of template repository. Its transmission rate is more stable and the fingerprint comparison is faster than SLK20M. I ntegrating ZK Teco's independently developed ideal fingerprint recognition algorithm (ZKFinger V10.0), it can instantly recognize the...
- Page 3 Application Fields Logistics Bank Public Security Organs Education Medical Prison Access Control Traffic Note: This Fingerprint Acquisition Module can be integrated into POS machines, Access Control machines, Visitor machines, Attendance machines, etc.
- Page 4 Features It is compact and thin, and the thickness of the sensor is only 16mm. It supports encrypted local storage of 8000 fingerprint templates, and supports offline fingerprint comparison. It is embedded with a 2-megapixel CMOS, and can provide high quality fingerprint image.
- Page 5 Specifications and Pin Descriptions Connector Pin 1 +5v GND Detail Shield UART UART LED Indicator Fingerprint Sensor...
-
Page 6: Technical Parameters
Technical Parameters Physical Dimension ( L * W * H ) 17.2 * 1.4 * 0.6 inch/44 * 36 * 16 mm Capture Dimension ( W * H ) 0.6 * 0.8 inch/15.24 * 20.32 mm Sensor 1 Ghz <1% FRR (False Rejection Rate) Accuracy FAR (False Accept Rate) <0.0001%... - Page 7 Installation on Host (Devices) Install the module on the device, as shown below, by tightening the four screws in the holes and linking the holder to the wire. Note: In order to ensure good and convenient fingerprint scanning, it is recommended to install the module on the wall horizontally or at an angle of 0-45 degrees.
- Page 8 Demo Testing Procedure It is required that the first time Users need to install the Device Driver before using the Fingerprint Scanner, and the process is as follows: (If the Users have already installed the Device Driver of SLK ID series Fingerprint Scanner, they can directly test without re-installing it.) 1) Download the Fingerprint Acquisition Module Driver file and then double-click the setup.exe file to open.
- Page 9 On the Setup Wizard, click Next and then click Install to install the driver.
- Page 10 After the completion of the Driver installation click Finish. 4) On the Fingerprint Acquisition Module Driver file, double-click the demo file.
- Page 11 On the demofolder, double-click the Debug file to go to the folder. 6 ) On the Debug folder, double-click the ZKFPModule.exe to go to the Fingerprint Acquisition Interface. ZKFPModule.exe desktop shortcut can also be created to instantly open the Fingerprint Acquisition Interface. Click Connect to connect to SLK20S.
- Page 12 7) After connecting to SLK20S, on the UserID field, enter the required User ID to register fingerprint, and then click Register. Press the finger for three times on the Sensor area for Registration. After successful Registration, click Identify, and then press the registered...
- Page 13 Operating Instructions Guide to Place the Finger It is advised to use the index finger, middle finger or the little finger for Registration. 1. Proper Positioning of Finger Note: The finger needs to be pressed flatly over the Sensor area, and make sure the finger is placed exactly on the Sensor area.
- Page 14 Cautions Make sure the fingers are clean when using the Fingerprint Scanner. Place the finger correctly. Recommended to use the index, middle or little fingers for Registration. Please avoid using the thumb and pinky fingers, because these two are clumsy when pressing on the Sensor Area. Suggestion Please keep the sensor away from dust.
- Page 15 Registration. Always try to maximize the Contact Area of the finger. ZKTeco suggests registering alternative Fingerprints. Soaked alcohol cotton is used for cleansing if the fingers are dry, and a clean napkin is used for cleansing if the fingers are wet.
- Page 16 Thank you for choosing this hybrid biometric recognition product, which was designed and manufactured by ZKTeco. As a world-renowned provider of core biometric recognition technologies, we are constantly developing and researching new products, and strive to follow the privacy laws of each country where our products are sold.
- Page 17 BLOCK F, Wellness Corporate Park Melodie, Hartbeespoort, South Africa : (012) 259 1047 Phone E-mail : info@zkteco.co.za www.zkteco.co.za Copyright © 2020 ZKTECO (PTY) LTD. All Rights Reserved.