Page 1
Original user manual GRIDDLE GRILL WAFFLE MACHINE Thank you for purchasing this high-quality appliance, original MILANTOAST, made in Italy. Please read the instructions carefully before using it. Follow the safety instructions and keep the manual for future reference. Pag. 1 / 8...
Page 2
1 PRELIMINARY OPERATIONS Carefully remove the product from the packaging and keep the original packaging for any return of the product. Remove all plastic, cardboard, any other protective element, accessories must be removed. The adhesive plastic film covering the stainless-steel parts must be removed before putting into operation unit.
Page 3
conductor to the M5 clamp located nearby input of the appliance power cable. The clamp, if present, is identified with the symbol • If the appliance is placed near walls, kitchen furniture, decorative finishes, etc. it is recommended that these are made of suitable and non-combustible materials.
Page 4
• Do not pull on the power cord or the appliance itself to remove the plug from the socket. • Prevent the power cord from getting in contact with the appliance. • Make sure children do not pull on the cord and cannot break the device or be crushed by it.
Page 5
On the market there are more preparations for waffles with relative advice on their use. The following are additional tips that Milantoast suggests to you in order to facilitate the making of your waffle maker. Tip 1: Always spread a thin layer of oil or melted butter on the cooking plates , both the fixed one (5) and the mobile one (6) every time you start to heat the plate and before pouring the batter.
Page 6
Based on these tests you will become familiar with the plate and the density of the batter. Tip 3: Pour the batter always starting from the center as shown in the figure, in this way you will have better control over the filling, limiting the risk of spills. It is also important that the whole mold is filled to cover the internal cones (you can help yourself with a ladle or a wooden spoon).
Page 7
water. After cleaning, carefully dry all parts of the device with a soft cloth. Store the clean plate in a dry and frost-free place. 6 MAINTENANCE In case of fault, contact the manufacturer. Check regularly, if used frequently, at least one once a year the conditions of the device, the connection cable, the hinges, the screws, the thermostat and on / off switch with indicator light.
Need help?
Do you have a question about the UK20000RHH and is the answer not in the manual?
Questions and answers