Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Chauvin Arnoux AEMC INSTRUMENTS PA32ER
Summary of Contents for Chauvin Arnoux AEMC INSTRUMENTS PA32ER
- Page 1 User Manual ENGLISH PA32ER POWER ADAPTER WITH AEMC INSTRUMENTS ®...
- Page 2 , Inc. has made every reasonable effort to ensure that this documentation is accurate; ® but does not warrant the accuracy or completeness of the text, graphics, or other information contained in this documentation. Chauvin Arnoux , Inc. shall not be liable for any damages, special, indirect, ®...
-
Page 3: Table Of Contents
TABLE OF CONTENTS 1. INTRODUCTION ................4 1.1 PRECAUTIONS FOR USE ............5 1.2 RECEIVING YOUR SHIPMENT ..........6 1.3 ORDERING INFORMATION ............. 6 1.3.1 Accessories and Replacement Parts ..........6 2. PRODUCT FEATURES ..............7 2.1 DESCRIPTION ................7 2.2 OVERALL VIEW ................ -
Page 4: Introduction
CAUTION - Risk of Danger! Indicates a WARNING. Whenever this symbol is present, the operator must refer to the user manual before operation Suitable for indoor use Chauvin Arnoux has adopted an Eco-Design approach in order to design this ®... -
Page 5: Precautions For Use
1.1 PRECAUTIONS FOR USE For personal safety and for the safety of the environment of use, you must read and comply with the precautions for use. If you do not comply with these safety instructions, there is a risk of electric shock, explosion, or fire. If you use the instrument in an unspecified manner or do not observe elementary safety rules, the protection that they provide could be compromised and endanger you. -
Page 6: Receiving Your Shipment
1.2 RECEIVING YOUR SHIPMENT Upon receiving your shipment, make sure that the contents are consistent with the packing list. Notify your distributor of any missing items. If the equipment appears to be damaged, file a claim immediately with the carrier and notify your distributor at once, giving a detailed description of any damage. -
Page 7: Product Features
OUTPUT : 15 V 2 A Max 4 magnets for 4 magnets for attachment to a attachment to a metallic surface metallic surface CHAUVIN ARNOUX ® Inc. d.b.a. AEMC Instruments ® 15 Faraday Drive Dover, NH 03820 USA • www.aemc.com... -
Page 8: Operating Instructions
3. OPERATING INSTRUCTIONS 3.1 POWER FROM THE MEASUREMENT SOURCE Using the leads provided and alligator clips, connect the adapter to a line voltage. Either between a phase (L1, L2, or L3) and neutral or between 2 phases. In the image above, the adapter is connected between the neutral (N) and phase L1. ■... -
Page 9: Charge Directly From The Wall Plug
3.2 CHARGE DIRECTLY FROM THE WALL PLUG Connect the adapter banana plug to the PA32ER power adapter. Connect the plug adapter cord between the adapter and the power socket. Open the elastomer cap on the instrument and connect the 4-point connector of the power supply to the instrument. -
Page 10: Specifications
4. SPECIFICATIONS 4.1 REFERENCE CONDITIONS Quantity of influence Reference values Ambient temperature 20 °C ± 3 °C 4.2 ELECTRICAL SPECIFICATIONS 4.2.1 Input voltage characteristics ■ Voltage range:100 V to 1000 V at a frequency from 40 Hz to 400 Hz 150 V to 1,000 Vdc ■... -
Page 11: Efficiency
4.2.3 Efficiency The efficiency depends on the supply voltage and the load. In general, it is 68%. Efficiency 1000 Supply voltage 4.2.4 Charger Charging current: 1A 4.3 ENVIRONMENTAL CONDITIONS Range of operation: from (-4 to 113) °F (-20 to +45) °C, from (30 to 95) %RH without condensation Range of storage: from (-13 to 158) °F (-25 to +70) °C, from (10 to 90) %RH without condensation... -
Page 12: Mechanical Characteristics
4.4 MECHANICAL CHARACTERISTICS Dimensions (L x D x H): (8.7 x 4.4 x 2.1) in (220 x 112 x 53) mm Lead: 5 ft (1.50 m), terminated by a specific 4-point connector Weight: Approximately 2 lbs (930 g) Inrush protection: IP54 when not in operation, IP50 in operation per IEC 60529 IK08 per IEC 62262... -
Page 13: Maintenance
If the instrument is returned for calibration, we need to know if you want a standard calibration or a calibration traceable to N.I.S.T. (includes calibration certificate plus recorded calibration data). Ship To: Chauvin Arnoux , Inc. d.b.a. AEMC Instruments ®... -
Page 14: Technical Assistance
5.3 TECHNICAL ASSISTANCE If you are experiencing any technical problems, or require any assistance with the proper operation or application of your instrument, please call, mail, fax, or e-mail our technical support team: Chauvin Arnoux , Inc. d.b.a. AEMC Instruments ®... -
Page 15: Warranty Repairs
(see link below). Then, return the instrument along with the signed CSA Form. Please write the CSA# on the outside of the shipping container. Return the instrument with postage or shipment pre-paid to: Chauvin Arnoux , Inc. d.b.a. AEMC Instruments ®... - Page 16 99-MAN 100569 v0 Chauvin Arnoux , Inc. d.b.a. AEMC Instruments ® ® 15 Faraday Drive • Dover, NH 03820 USA Phone: (603) 749-6434 • (800) 343-1391 • Fax: (603) 742-2346 www.aemc.com © Chauvin Arnoux, Inc. d.b.a. AEMC Instruments. All Rights Reserved.