Table of Contents
Advertisement
3.3 Color mode
NO.
Mode
1
Cool White
2
Green
3
Blue
4
Green+Blue
5
Red+Green
6
Red+Green+Blue
7
Mode A: Blue+Gradual Red
8
Mode B: Green+Gradual Red
4. INSTALLATION
1. It is recommended to install a light every 20m, the approximate exposure area of each unit.
2. Lights should be installed in the direction that they will not shine directly into the house.
3. For training or competition pools, lights must be installed on the side to prevent swimmers from seeing any glare.
4. Nothing should be placed on the pool side directly above the lights for ease of future maintenance.
5. Cables connect between each Eagle eye and transformer must be at least 1mm² (AWG18) and the distance between them
must not exceed 150ft (50m); otherwise the lights will not function properly.
6. Qualified electrician should take the responsibility to decide wire which can fulfil operating condition for this light when
more than one Eagle eye is connect to transformer.
4.1 Wiring diagram
Basic ON/OFF mode
NO.
9
Mode C: Blue+Gradual Green
10
Mode D: RGB Color Sequence
11
Mode E: RGB Color Sequence
12
Mode F: Auto Color Change
13
Mode G: RGB Color Sequence
14
Mode H: Rapid Auto Color Change
15
Warm White
2
ColorTouch Control Box PCB
AC Mains
Power cord
Zone 2
Power cord
ColorTouch Mode
Mode
INSTALLATION
Zone 1
Power cord
P4
Advertisement
Table of Contents
