Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for tempmate M2T
Summary of Contents for tempmate M2T
-
Page 2: Table Of Contents
13. Contact ........................................18 1. Introduction 2. Intended Use The tempmate.®-M2 is designed to be mounted on The tempmate.®-M2 is designed to be mounted on a shipment or stationary and measure relevant para- shipments or stationary and to record relevant parame- meters such as temperature and optionally relative ters as mentioned in the data sheet. -
Page 3: Tempmate.®-M2 Model
Model Multi-Use Temperature Rel. Humidity V1.0-12/2021-DE · Technical Changes and Errors excepted... -
Page 4: Device Description
empower your supply chain. 4. Device Description 5. Display Not Started Number Measured Average Value Values Start Button Stop Button Started* Highest MKT Value Measured Value Sensor rel. Humidity Start Button Time & Date Stopped Lowest Stop Button Measured Value * if the start delay is set, this symbol flashes after a suc- cessful start until the time limit has elapsed V1.0-12/2021-DE ·... -
Page 5: Operation And Usage
STEP 3 Set Mark This step is only necessary if you want to adapt the pre-installed configuration to your application. Briefly press the green start button twice in succession to set a mark. Download the free tempbase 2 software – https://www.tempmate.com/de/download/ A successfully set mark is indicated by the word „MARK“ and the number of marks set so Install the tempbase 2 software on your PC. far in your display. -
Page 6: Readout With Tempbase Software
empower your supply chain. Open the drive and copy the PDF and CSV report stored on it for your filing. Note: A report is automatically generated as PDF and/or CSV when the device is stopped. The device can still be read out during a running measurement and an intermediate report can be downloaded. Note: Already generated reports are automatically overwritten and deleted when the device is restarted. Readout with the tempbase 2 software (optional) Remove the cap and connect the logger to your PC. -
Page 7: Important Notes
empower your supply chain. 9. Important Notes Insert the new battery and replace the cover, closing it clockwise. Remove the cap and connect the logger to your PC. Open the tempbase 2 software to synchronize date & time again. This process is automatically trigge Configuration cannot be changed during recording. - Page 8 Main Technical Specifications tempmate.®-M2 Main Technical Specifications tempmate.®-M2 Temperature Sensor HQ Digital Temperature sensor (internal and external optional) Temperature Sensor HQ Digital Temperature sensor (internal and external optional) Temperature Range -30°C to +70°C (–40°C to +90°C with ext. T Sensor) Temperature Range -30°C to +70°C (–40°C to +90°C with ext.
- Page 9 Stainless Steel (30 x 5 mm) Cable Material Sensor Connetion M2-USB Connection Cable length 1.2 m Cable Diameter 3 mm tempmate.®-M2 External High/Low T-Sensor Cable Material Temperature Sensor PT100 Sensor Temperature Range -80°C to +200°C Temperature Accuracy ±1°C Temperature Resolution 0,1°C...
-
Page 10: Contact
Contact Do you have any questions? Please contact us - our experienced team will be happy to support you. sales@tempmate.com +49 7131 6354 0 V1.0-12/2021-DE · Technical Changes and Errors excepted... - Page 11 GmbH Wannenäckerstr. 41 74078 Heilbronn, Germany Tel. +49-7131-6354-0 sales@tempmate.com www.tempmate.com...
Need help?
Do you have a question about the M2T and is the answer not in the manual?
Questions and answers