Maintenance Cleaning And Storage - BorMann PRO BEM1800 Owner's Manual

EL
Infinitely adjustable speed setting
Two rpm ranges can be pre-selected with the speed selector switch (4):
Gear 1 180-400 /min
Gear 2 300-700 /min
The necessary speed depends on the type of the material mixed and it is recommended to verify it by a practical test.

Maintenance cleaning and storage

WARNING! DANGER OF INJURY!
Switch the device off and pull the plug out of the mains socket before carrying out any work on the device.
Correct maintenance for the machine can prolong the working life; The handle switch must always keep in proper function and good maintenance;
The mixing tools should be cleaned when the operation is finish or no use for long time; Use a cloth to clean the device.
Normally the flowing water or Quartz sand can clean the mixing tools well. Do not under any circumstances use petrol or strong solvents. Do not allow any
liquids to enter the device.
DO not fore any mechanical stress in the machine, such as POUND, because it will be unavoidable damaged;
The mixing shaft must always be anti-pollution; The threaded hole must always be put protecting cover;
The vent of motor housing can not be covered when the machine is in operation, there can not be any flammable materials in the machine;The vent must be
often cleaned;
Store the device & accessories in a dry room where out of the reach of children also.
Only original parts can used in this machine.
The carbon brush must be checked and maintenance when the machine operation up to 60hours, please change the brush in time if find the brush worn out
(must be carried out by the service department).
Service centre
WARNING! Have your device repaired only by qualified specialist personnel using original manufacturer parts only. This will ensure that your device remains
safe to use.
WARNING! If the replacement of the supply cord is necessary, this has to be done by the manufacturer or his agent in order to avoid a safety hazard. This will
ensure that your device remains safe to use.
Disposal
The packaging is wholly composed of environmentally-friendly materials that can be disposed of at a local recycling centre.
Do not dispose of electrical power tools with the household rubbish!
In accordance with European Directive 2012/19/EC, worn out electrical power tools must be collected separately and taken for environmentally
compatible recycling. Contact your local refuse disposal authority for more details of how to dispose of your worn-out devices.
5
WWW.BORMANNTOOLS.COM