Signal Strength Meter - Cobra microTALK PR3500DX Owner's Manual

Using Your Radio
Operation
Intro Operation Customer
Dual Function Buttons
Assistance
Two of the buttons on the microTALK
Mode/Lock
• Press and release the button to scroll to the next mode function.
• Press and hold the button for two seconds or more to turn the
Secondary Icons lock function on or off.
Enter/Hi•Low Power
• Press and release the button to enter settings.
• Press and hold the button for two seconds or more to toggle
between high and low power transmission.
Notice
Speaker/Microphone/Charge Jack
Your microTALK ® radio can be fitted with an external
Speaker/Microphone, freeing your hands for other tasks.
This same jack also serves as the connecting point for
an optional wall charger/adapter.
To attach a speaker/microphone:
Speaker/Microphone/
Charge Jack
1. Open the speaker/microphone/charge
tab on top of your microTALK
2. Insert the plug into the speaker/
microphone/charge jack.
To connect a wall charger/adapter
(not included):
1. Open the speaker/microphone/charge
tab on top of your microTALK
2. Insert the wall charger/adapter plug
into the speaker/microphone/charge jack.

Signal Strength Meter

Signal Strength
Your microTALK
Meter that shows the strength of your incoming
and outgoing transmissions. The ascending bars
next to the signal strength indicate the strength
of the signal. The greater the number of bars
visible, the stronger the signal. The fewer
number of bars visible, the weaker the signal.
English
6
Warranty
® radio have Dual Functions:
® radio.
® radio.
® radio has a Signal Strength
Introduction
Main Icons
microTALK ® Range
Your microTALK ®
Your range will vary depending on terrain and conditions.
Maximum Range
Intro
Secondary Icons
Reduced Range
Secondary Icons
• Reduced Range
Scrolling through Mode Functions
By scrolling through the Mode Functions, you will be able to
select or turn on/off preferred features of your microTALK
When scrolling through the Mode Functions, your radio features
will be displayed in the following order:
Mode/Lock Button
•
Scroll through the mode functions using the Mode/Lock button.
Each press and release of the Mode/Lock button will advance to
the next mode function. Press the Talk button at any point to
return the radio to Standby mode.
Operation
Customer Assistance Warranty
Intro Operation Customer
Assistance
radio has a range of up to 16 km (10 miles).
In flat, open country your radio will
operate at maximum range.
Operation Buildings and foliage in the path of the Customer Warranty
Assistance
signal can reduce the range of the radio.
Dense foliage and hilly terrain will
further reduce the range of the radio.
On FRS channels 8 through 14, your radio
automatically switches to low power, which
will limit the range the radio can communicate.
Notice
Remember, you can achieve maximum
range by using maximum range
extender. See page 5 for details.
Notice
Set Privacy Codes
Set VOX On/Off
Set VOX Sensitivity Level
Set Memory Locations
Set Channel Scan
Set Privacy Code Scan
Set Memory Location Scan
Set VibrAlert ® and/or Call Alert
Set Call Tones
Set Roger Beep On/Off
Set Keystroke Tones On/Off
Nothing comes close to a Cobra
Warranty
•
•
® radio.
® 7