Problem Solution - VATTON 49130 Manual

EN
- Clean the mower or do any other works before checking
the mower.
The ON/OFF switch and safety switch must not be locked.
Use only those batteries for the power tool that have been
designed to be used for that tool. Use of other batteries may
lead to injuries and a risk of fire.
Warning: This electric tool generates during the operation
of a magnetic field. Under certain circumstances, this field
can disrupt the functioning of active medical implants or
liabilities. To reduce the risk of serious injury or fatal, we
recommend that persons wearing a medical implant to
consult a doctor and the manufacturer of the medical im-
plant before use of the device. Do not use the device near
flammable liquids or gases. Risk of fire and explosion in
case of short circuit.
Do not use the machine in adverse weather conditions,
particularly if there is a risk of lightning.

PROBLEM SOLUTION

1. I CANNOT FIT THE BATTERY INTO
THE BATTERY CHARGER. WHY?
The battery can be inserted into the charger only in one
direction. Turn the battery around until it can be inserted
into the slot.
2. REASONS FOR DIFFERENT BATTER PACK
WORKING TIMES.
Charging time issues, as above, and having not used a
battery pack for a porlonged time will reduce the wor-
king life of the battery pack. This can be corrected after
several charge and discharge operations by charging &
working with your drill. Heavy working conditions such as
large screws into than lighter working conditions. Do not
re-charge your battery pack below 0ºand above 50º as this
will affect performance.
3. HOT BATTERY PACK PROTECTION.
The normal charging temperature is between 0º and 50º.
When the battery pack is too hot, it automatically starts a
HOT battery pack delay, and suspends charging until it has
reached the correct temperature. The charging process will
then automatically begin.
6