XCS Excess15 User Manual page 25

Table of Contents

Advertisement

02
HUll / DEcK
02.7
Gangway (optional)
The boat may optionally be fitted with a foldable carbon gangway.
Remove, store and stow the gangway when sailing.
WaRNING
Do not use the gangway as a diving board.
02.8
Steering system
The steering system is made up of textile steering cables and two
aluminium quadrants.
You can reach it through the engine compartments both starboard and
port sides.
The suspended rudders are fitted with stainless steel stocks.
Only WD 40 should be used to maintain nylon ertalon or teflon
bushings.
Please refer to Chapter 'SAFETY' as for the emergency tiller use.
02.9
anchoring
WINDLASS
l
The electric windlass works with the On-board 12 V batteries.
The windlass is operated using the control located in the starboard
locker on the forward deck or in the chain counter box (optional) in
the starboard helm station.
REcommENDaTIoN
Use the electric windlass when one or two engines are operating.
If the electrical windlass does not function properly, check its
automatic breaker located in the starboard locker on the forward deck.
For the maintenance of the windlass, please refer to the manufacturer's
guide.
PREPARATION FOR MOORING
l
Set the strop fastening it to the chainplates at the ends of the main
beam.
Insert the strop inside the stem anchor roller.
Make fast the strop to the central cleat when lowering the chain.
REcommENDaTIoN
before you anchor, check the type of the sea bed, the depth of water and the
strength of the stream.
23

Advertisement

Table of Contents
loading

Table of Contents