XCS Excess15 User Manual page 118

12.1 maintenance schedule
The information given hereafter are only examples and it is not an
exhaustive list.
They must be adapted, depending on the use of your boat.
WaRNING
Follow without fail the recommendations given in the instruction guides by the
manufacturers of the components added to your boat.
116
maINTENaNcE
HULL / DECK FITTING / HULL
Clean the hull with appropriate products ..........................QUARTERLY
Clean s/s parts .................................................................QUARTERLY
Dismount, clean and grease winches ....................................ANNUAL
Check the watertightness of the sea-cock fittings ............ BI-ANNUAL
Clean the sea cock fittings and strainers
from the outside .............................................................. BI-ANNUAL
MOORING / WINDLASS
Rinse ground tackle and anchor
locker with fresh water ................................................... WHEN USED
Check the gypsy and anchor/chain
fastening device ...............................................................BI-ANNUAL
Check locking / braking system .......................................QUARTERLY
Check mooring lines and fenders ......................................BI-ANNUAL
Check the electric connections
(remote control, relay, etc.) ..............................................QUARTERLY
RUNNING / STANDING RIGGING / SAILS
Lubricate the different travellers with Teflon .....................QUARTERLY
Check and tighten the different shackles .........................QUARTERLY
Check the running rigging tightening ...............................QUARTERLY
Check the halyard and sheet for wear points ...................QUARTERLY
Rinse the whole running rigging
and sails ..........................................................................QUARTERLY
Check the mainsail battens
and main seams ..............................................................QUARTERLY