Konica Minolta CS-3 Operation Manual page 6

About this Manual
How to use this manual
Structure of this manual
This manual consists of the chapters listed below.
Chapter1 Safety Precautions & Warnings
When using the REGIUS Console CS-3, the cautions detailed in
this chapter must be strictly followed in order to correctly use the
device.
Chapter2 Operation
The operation of CS-3 is described in this chapter.
Chapter3 Sequence of Examination
This chapter describes the sequence of examination using CS-3.
Chapter4 Description of Screens
This chapter describes each of the CS-3 screens.
Chapter5 Troubleshooting
This chapter describes typical methods of trouble shooting and
the error message list displayed on CS-3.
Chapter6 Optional Functions
The operation of optional functions available for CS-3 is described
in this chapter.
Chapter7 Operation of Optional Equipment
This chapter describes how to operate the optional equipments
for the CS-3.
Chapter8 Care & Maintenance
This chapter details the procedure for care and maintenance of
the CS-3.
Specification This chapter details the specification of the CS-3.
Index The index describes special terminology used in the CS-3 User's
Manual.
Notes on Device Identification
Upright/Cassette in this manual denote Upright Reader (REGIUS 350/370) and Cassette
Reader (REGIUS 190/170) respectively.
CS-3 Control Unit and CS-3 Operation Unit denote the following devices.
CS-3 Control Unit
Implements control of the reader devices, image data processing and output of image
data. CS-3 Control Unit can be interfaced to reader devices in the configuration where
maximum one Upright Reader (REGIUS MODEL 350/370) and 16 REGIUS Cassette
Readers (REGIUS MODEL 170/190) at a time.
CS-3 Operation Unit
Comprised of LCD for display and touch panel that is incorporated in the LCD surface,
allowing inputs of various data and checks on the image data. A desk-stand is provided
as an accessory.
REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2
< 4 >