Konica Minolta CS-3 Operation Manual page 10

Ch.1 Safety Precautions & Warnings
Alert and Symbol Marks
This is the safety alert symbol and is intended to draw the attention of the user to potential dangers to the user
him/herself or to others that may arise during the use or operation of this system.
These messages must be read thoroughly and strictly observed.
All safety related precautions should be carefully read and fully understood before proceeding with assembly or
usage of this system.
Symbols indicating the need for caution (including danger and warnings)
Normal Caution
Symbols indicating prohibited acts
Prohibited
Symbols indicating essential acts (compulsory or indicated acts)
Ground
Other Symbols
AC Voltage
(Power Supply)
Warning Text (Signal Word)
Signal words indicate the degree of potential hazards in the product.
There are 3 degrees of caution labels, and each is used depending on the level of risk and damage caused by
incorrect use and mishandling.
DANGER
WARNING
CAUTION
Bodily injury
(and damage to property)
Damage to property only
NOTE : If the contents of this page are not legible, order a new manual.
REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2
Safety Alert Symbol
Description of Graphic Symbols
Danger of Fire Danger of
Electrocution
Do not touch Do not disassemble
Remove the plug
from the power
outlet
Main Power
Main Power
Supply OFF
Supply ON
: Failure to observe the caution will produce high risk of serious or fatal injury.
: Failure to observe the caution will produce moderate risk of serious or fatal injury.
: Failure to observe the caution will produce moderate risk of serious or fatal injury or dam-
age to property.
Loss of life or serious injury
(Damage is serious)
Moderate damage or light injury
(Damage is light)
Danger of Danger of
High Rotation
Temperature
Do not touch Do not expose Mobile
with wet hand to moisture Prohibited
Power Supply
Standby
Risk of the damage
High
DANGER
or
WARNING CAUTION
CAUTION
< 8 >
Multi-Leads
Prohibited
Low
WARNING
CAUTION