Advertisement
Available languages
Available languages
MOUNTING SĒNIK FLEX:
Disconnect power at the source prior to attempting installation or
service of product.
VIA MOUNTING CLIPS (Figure 2):
1. Determine locations for mounting clips. Best practices include using
at least one mounting clip for every foot of Sēnik Flex.
2. Attach the mounting clips to the mounting surface using the screws
included.
3. Gently press the Sēnik Flex into the mounting clips.
VIA ALUMINUM CHANNEL (Figure 3):
4. Determine the locations for the screws to be used when mounting.
Channel can be mounted either directly to the mounting surface, via
static clips, or via adjustable clips.
5. Attach the aluminum channel to the surface using screws (not
included), or attach the aluminum channel mounting clips to the
mounting surface using the screws included, then clip the
aluminum channel into the mounting clips.
6. Gently press the Sēnik Flex into the aluminum channel.
CUTTING SĒNIK FLEX:
This product is not intended to be cut in the field. If a shorter length
of Sēnik Flex is required, please contact American Lighting directly
for information on our Custom Cut program. Any cuts, connections,
or sealed ends that are made by anyone other than an American
Lighting Custom Cut representative will void the warranty.
CONNECTING POWER (Figures 4 & 5):
Disconnect power at the source prior to attempting installation or
service of product. Use this fixture with appropriate 24V DC power
supply only. Any other power supply may damage the fixture.
1. Connect a 24V DC power supply to the beginning of the
Sēnik Flex run using the conkit attached in the previous section.
See Figure 4 for single color (2pin) wiring diagram. See Figure 5 for
RGBW (5pin) wiring diagram.
2. Connect the 24V DC power supply to line voltage. Single color
Sēnik Flex does not require a controller, however, RGBW Sēnik Flex
will require a form of RGBW control for color changing
capability. Sēnik Flex is compatible with Trulux control systems and
other DMX control options.
CARE AND MAINTENANCE:
1. For cleaning, use a soft, dry or damp cloth. Do not use harsh chemicals or abrasives.
www.ProluxeLighting.com
FIGURE 2
FIGURE 3
FIGURE 4
Sēnik Flex Power
FIGURE 5
Sēnik Flex Power
Sales@ProluxeLighting.com | Denver, CO | 866.700.5648
Black
Red
Cable
Yellow
Red
Green
Cable
Blue
Black
Negative (-)
Positive (+)
White
Red
Green
Blue
+
Black (Positive
)
©2022 Proluxe Lighting REV.2212
Advertisement
