Honeywell HM Series User Manual page 12

Hide thumbs Also See for HM Series:

Table of Contents

Available languages

INSTALLATION (CONTINUED)

Window Bracket Kit:

Part A:

Min. Length 26.5" (67.3cm)

This window kit is designed to fit most standard sliding windows. If your window is outside of the

size parameters as outlined above, the window bracket can be cut shorter to fit by bringing it to a

nearby hardware store.

Note: After setting the window bracket to the size of your window, please remove it from the window

and follow the instructions below.

2. Connect the hose to the rear exhaust outlet on the back of the unit. Slide-in the hose connector

then slide down until it is locked in place.

Part B

Horizontal Sliding Window

Part A + B:

Min. Length 26.5" (67.3cm)

Max.Length 49" (124.4cm)

Vertical Sliding Window

Hose:

Dia.5.9'' (15cm)

Length: 9.8'' to 59'' (25cm to 150cm)

Table of Contents

Hm12cesawk