Safety Information - Asus ASUSTEK ROG Strix G15DK User Manual

CDRH Regulations
The Center for Devices and Radiological Health (CDRH) of the U.S. Food and Drug Administration
implemented regulations for laser products on August 2, 1976. These regulations apply to laser
products manufactured from August 1, 1976. Compliance is mandatory for products marketed in the
United States.
WARNING! Use of controls or adjustments or performance of procedures other than those
specified herein or in the laser product installation guide may result in hazardous radiation
exposure.

Safety information

Disconnect the AC power and peripherals before cleaning. Wipe the Desktop PC using a clean
cellulose sponge or chamois cloth dampened with solution of nonabrasive detergent and a few
drops of warm water then remove any extra moisture with a dry cloth.
• DO NOT place on uneven or unstable work surfaces. Seek servicing if the casing has been
damaged.
DO NOT expose to dirty or dusty environments. DO NOT operate during a gas leak.
•
DO NOT place or drop objects on top and do not shove any foreign objects into the Desktop
•
PC.
DO NOT expose to strong magnetic or electrical fields.
•
DO NOT expose to or use near liquids, rain, or moisture. DO NOT use the modem during
•
electrical storms.
Battery safety warning: DO NOT throw the battery in fire. DO NOT short circuit the contacts.
•
DO NOT disassemble the battery.
• Use this product in environments with ambient temperatures between 5˚C (41˚F) and 40˚C
(104˚F).
DO NOT cover the vents on the Desktop PC to prevent the system from getting overheated.
•
DO NOT use damaged power cords, accessories, or other peripherals.
•
• To prevent electrical shock hazard, disconnect the power cable from the electrical outlet
before relocating the system.
• Seek professional assistance before using an adapter or extension cord. These devices could
interrupt the grounding circuit.
• Ensure that your power supply is set to the correct voltage in your area. If you are not sure
about the voltage of the electrical outlet you are using, contact your local power company.
• If the power supply is broken, do not try to fix it by yourself. Contact a qualified service
technician or your retailer.
While installing additional memory modules, follow the table below to ensure system
stability and avoid possible booting up failure.
DIMM_B1
DIMM_B2
DIMM_A1
DIMM_A2
8
1*DIMM 2*DIMM
√ √
√
3*DIMM 4*DIMM
√ √
√ √
√
√ √