Honda SPORTRAX 250EX Owner's Manual page 174

０７／０４／１８ １３：０１：３８ ３２ＨＮ６６５０ ０１７５
If You Have a Flat Tyre
Emergency Wheel Removal/Installation
Refer to Saf ety Precautions
(1) wheel nuts
Removal
1. Park your ATV on a firm, level surface.
2. Raise the front (or rear) wheels off the ground and place a support
block under the vehicle.
3. Remove the wheel nuts ( ).
4. Remove the wheel.
Avoid getting grease, oil, or dirt on the front brake disc or pad surfaces
when removing and installing each wheel. Any contamination can cause
poor brake performance or rapid pad wear after reassembly.
166 Taking Care of the Unexpected
on page 75
(1)
1
.
(1)
(2)
(2) wheel rim