Table of Contents
Advertisement
SETTING UP YOUR OVEN
TURNTABLE INSTALLATION
Cleaning the cooking compartment and putting the turntable in place.
For new installations, make sure all packaging and shipping tape has been removed from the
turntable shaft.
Before using the appliance to prepare food for the first time, you will need to put the turntable in
place correctly. You must clean the cooking compartment and accessories.
How to put the turntable in place:
1. Place the turntable ring assembly③ into the recess
in the cooking compartment.
2. Place the glass turntable ①on the turntable ring assembly③.
Fit the raised, curved lines in the center of the glass turntable
bottom between the three spokes of the shaft.
Make sure that the glass turntable①engages in the
turntable shaft ② in the center of the cooking
compartment floor. The rollers on the shaft should fit inside
the turntable bottom ridge.
• Never use the appliance without the turntable. Make sure that it is
properly engaged. The turntable can turn clockwise or anti-clockwise.
• Never place the glass
never be restricted.
• Both glass turntable and turntable ring assembly must always be used
during cooking.
NOTE
• All food and containers of food are always placed on the glass turntable
for cooking.
• Never restrict the movement of the turntable.
• If glass turntable or turntable ring assembly cracks or breaks, contact
your nearest authorized service center.
upside down. The glass
turntable
11
1
2
turntable
3
should
Advertisement
Table of Contents
