Download Print this page

Thundercomm TurboX C865 Quick Start Manual

Development kit

Download this manual

Thundercomm TurboX C865 Development Kit

Quick Start Guide

Rev. V1.0

DN:

tc-a-2110

Need help?

Do you have a question about the TurboX C865 and is the answer not in the manual?

Page 1 Thundercomm TurboX C865 Development Kit Quick Start Guide Rev. V1.0 tc-a-2110...
Page 2: Package List
Package List C865 SOM Main IO Board Navigation Mezzanine Board 12V/2.5A AC Power Adaptor Main Camera IMX577 Module Kit Tracking Camera OV9282 Module Kit Speaker (x2) Copyright© 2022 Thundercomm Technology Co., Ltd. All rights reserved.
Page 3 8. HDMI connector 18. Dip Switch#2 28. Wi-Fi Ch0 RF receptacle 9. Ethernet connector 19. Volume up button 29. Wi-Fi Ch0 on-board antenna 10. LS1 low speed connector 20. Volume down button Copyright© 2022 Thundercomm Technology Co., Ltd. All rights reserved.
Page 4 10. LS2 connector 21. DIP switch 1 32. Display connector 11. LS3 connector 22. CAM3 connector 33. CAM5 connector * LS/HS mate connectors on navigation mezzanine goes to main IO LS/HS connectors Copyright© 2022 Thundercomm Technology Co., Ltd. All rights reserved.
Page 5: Let's Get Started
 USB 2.0 debug connector (connector 22 on Main IO Board) if debug function is needed. 4. Press Power on button (connector 21 on Main IO Board) for three seconds to boot up the device. Copyright© 2022 Thundercomm Technology Co., Ltd. All rights reserved.
Page 6 The products described in this document are not intended for use in implantation or other life support applications failure to claim or delay in claiming such rights shall not be deemed to be a waiver of such rights by Thundercomm.