How Can I Find The Wireless Security Information (Ssid And Network Key) - Brother SE700 Operation Manual

Error messages
When the speed controller is set to control the
zigzag stitch width, the "Start/Stop" button does
20
not operate.
F**
21

How can I find the wireless security information (SSID and network key)

1) You should see the documentation provided with your wireless access point/router.
2) The default SSID (wireless network name) could be the manufacturer's name or the model name.
3) If you do not know the security information, please consult the router manufacturer, your system administrator, or
internet provider.
4) Some Wireless SSIDs and network keys (passwords) are case (upper case and lower case) sensitive. Please
properly record your information.
*
The network key may also be described as a password, security key or encryption key.
*
If the wireless access point/router is not broadcasting the SSID, the SSID will not automatically be detected. You will have to manually
enter the SSID.
a
Cause/solution
This message is displayed when the speed control lever is set to control the
zigzag stitch width, and the "Start/Stop" button is pressed. Set [Width
Control] to [OFF] in the settings screen (page 15), or use the foot controller to
operate the machine.
If error message [F**] appears in the LCD while the machine is being used,
the machine may be malfunctioning. Contact your authorized Brother dealer
or the nearest Brother authorized service center.
1 SSID
2 Network key (password)
Troubleshooting
5
95