Brother SE700 Operation Manual page 12

Names of Machine Parts
■ Embroidery unit
d
1 Embroidery carriage frame holder (page 66)
2 Embroidery unit connection (page 62)
3 Carriage (page 62)
4 Release button (page 63)
■ Operation buttons
b
a
1 "Start/Stop" button
Press the "Start/Stop" button to start or stop sewing.
The button changes color according to the machine's
operation mode.
Green: The machine is ready to sew or is sewing.
Red: The machine cannot sew.
Orange: The machine is winding the bobbin thread, or
the bobbin winder shaft is moved to the right
side.
2 Reverse/Reinforcement stitch button
Press the reverse/reinforcement button to sew reverse/
reinforcement stitches. (page 34)
3 Needle position button
Press the needle position button to raise or lower the needle.
Pressing the button twice sews one stitch.
4 Thread cutter button
Press the thread cutter button after sewing is stopped to cut
both the upper and the bobbin threads.
5 Sewing speed controller
Slide the sewing speed controller to adjust the sewing speed.
The sewing speed cannot be adjusted while sewing decorative
stitches or embroidering.
10
a b
c
c d e
■ Operation panel and operation keys
i
1 LCD (liquid crystal display) (touch panel)
Selected pattern settings and messages are displayed.
Touch the keys displayed on the LCD to perform operations.
For details, refer to "LCD Operation" on page 13.
2 Previous page key
Displays the previous screen when there are items that are not
displayed on the LCD.
3 Next page key
Displays the next screen when there are items that are not
displayed on the LCD.
4 Help key
Touch to get help on using the machine.
5 Settings key
Touch to set the needle stop position, the buzzer sound, and
more.
6 Embroidery key
Touch to display the pattern type selection screen.
7 Utility stitch key
Touch to sew a utility stitch or decorative stitch.
8 Back key
Touch to return to the previous screen.
9 Presser foot/Needle exchange key
Touch this key before changing the needle, the presser foot,
etc. This key locks all key and button functions (except
prevent operation of the machine.
Note
• The operation keys of this machine are capacitive
touch sensors. Operate the keys by directly
touching them with your finger.
• Since the operation keys react differently
depending on the user, adjust the setting for
"Adjusting input sensitivity for operation keys" on
page 16.
• When using an electrostatic touch pen, make sure
that its point is 8 mm or more. Do not use a touch
pen with a thin point or a unique shape.
) to