Download Print this page

Panasonic ET-RFF200C Operating Instructions page 4

Replacement filter unit

Advertisement

Replacing the air filter unit (continued)
Attention
Make sure that the main filter unit and the pre-filter are properly attached before using the
z
projector. If they are not attached, the projector will suck in dirt and dust causing a malfunction.
Dispose of the packaging materials properly after unpacking the product.
z
Do not disassemble the main filter unit.
z
Note
If you use the projector without attaching the main filter unit, the filter indicator blinks in red and
z
the message appears on the projected image for about 30 seconds. Turn the projector off, and
then attach the main filter unit before turning the projector on again.
The replacement cycle of the air filter units varies greatly depending on the usage environment.
z
For procedures on maintaining the air filter unit, refer to the operating instructions supplied with
z
the projector.
Disposal
J
When discarding this product, please contact your local authorities or dealer and ask for
the correct method of disposal.
松下电器 (中国 ) 有限公司
北京市朝阳区景华南街 5 号远洋光华中心 C 座 3 层、6 层
网站: https://panasonic.cn
原产地 : 中国
发行 : 2022 年 6 月 第二版
© 松下互联株式会社 2022 版权所有
TI0316ZF1062 -PT
Printed in China

Advertisement

loading

This manual is also suitable for:

Et-rff200