Product Features - Electrolux EWT9074N5SA User Manual

www.electrolux.vn
10

2.2 Product Features

Auto sensing water level
Auto sensing is a feature where the
washer fills automatically with water to
just the right level for your clothes load.
You do have the option to manually set
the water level if you wish.
We recommend you use the auto sensing
water level option to ensure there is just
the right amount of water for the wash
load in the machine. In other words, it will
usually give you the best wash while also
being the most efficient in terms of water
usage.
At times during a wash, it may appear
your machine is either doing nothing or
intermittently it is only gently vibrating/
jiggling/agitating.
This is because your machine could be:
• In auto sensing test mode and the
machine is determining the correct
amount of water for your wash.
• At a drain stage of the wash program
and the machine is allowing time for
water to flow the washbowl from to the
outbowl.
• Engaging or disengaging the drive
clutch mechanism. Wait a short time,
your washing machine will complete
the above tasks and continue with the
wash.
The amount of water for auto is factory
set at an optimised level. You can adjust
the Auto level up or down by a small
amount.
Power Failure Recovery
When there is power failure while
the machine is washing or rinsing or
spinning. The machine tries to save the
settings at which stage the machine is
doing and then when the power returns
back the machine will starts washing
from the stage where it is left off.
UltraMix
This feature helps to dissolve and
activate the active ingredients of the
detergent, by blending the detergent with
the water for about 5 minutes (except
Quick 20 program), before dispensing
into the tub and onto the clothes.