ESI NEVA UNO Quick Start Manual page 3

Connectors and Functions
to provide power for
1 - +48V Phantom Power Switch
a condenser microphone. When enabled, the power
LED illuminates red, when disabled orange.
for input 2 to switch between
2 - L ine Hi- Z S witch
Line level and Hi-Z guitar signals.
to enable or disable
3 - Dir ect Monitor ing S witch
input monitoring to listen to the input signals.
to change the input gain / input level
4 - Gain K nob 1
for input 1. The LED ring indicates the signal level:
green (= good), orange (= optimal), red (= too high).
to change the input gain / input level
5 - Gain K nob 2
for input 2. The LED ring indicates the signal level:
green (= good), orange (= optimal), red (= too high).
to change the main output volume
6 - Vol ume K nob
for connected headphones and speakers.
to connect a microphone via XLR cable or
7 - XL R / TR S Combo Input 1
a line signal via 1/4" TRS connector.
to connect a line signal via 1/4" TRS connector or an
8 - T R S Input 2
electric guitar with 1/4" TS connector.
to connect headphones.
9 - Headphone Output
to connect the stereo master line level output signal
10 - Line Output 1 / 2
via RCA cables for left and right channels. This is the output that
connects to your active studio monitors or amplifier or a mixing desk.
to connect the audio interface to a PC, Mac, tablet
11 - USB - C Connector
or mobile phone.
General Information
Trademarks: ESI, Neva and Neva Uno are trademarks of ESI
Audiotechnik GmbH. Windows is a trademark of Microsoft Corporation.
Other product and brand names are trademarks or registered trademarks
of their respective companies.
Correspondence: For technical support inquiries, contact your
nearest dealer, local distributor or ESI support online via our website
www.esi-audio.com.
Disclaimer: All features and specifications subject to change without
notice. Parts of this document are continually being updated. Please
check our web site www.esi-audio.com occasionally for the most
recent update information.
Manufacturer Info: ESI Audiotechnik GmbH, Mollenbachstr. 14,
D-71229 Leonberg, Germany