Audio Levels; Specific Absorption Rate Data; Special Conditions For Safe Use - Bartec Pixavi Phone Quick Start Manual

Audio Levels

The device is compliant with the EN9650-1 standard.
However, third party music players can exceed the
recommended audio levels, and as such should be used with
caution as prolonged listening to sound at high volumes can
cause permanent damage.

Special Conditions For Safe Use

Ex ib parameter USB Interface
Uo X.X V
Io X.X A
Po X.X W
Co -
Lo -
FCC/IC
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) this device
may not cause harmful interference, and (2) this device must
accept any interference received, including interference that
may cause undesired operation.
Ce produit répond aux exigences de la section 15 de la
réglementation FCC. Son fonctionnement est soumis aux
deux conditions suivantes: (1) cet appareil ne doit pas causer
d'interférences nuisibles et (2) cet appareil doit accepter
toute interférence reçue, y compris les interférences qui
peuvent provoquer un fonctionnement indésirable.
Text must be approved during FCC cert

Specific Absorption Rate Data

The Pixavi Phone, Pixavi Thermal and Pixavi Cam is a radio
transmitter and receiver. It is designed and manufactured
not to exceed the emission limits for exposure to radio
frequency (RF) energy set by the Federal Communications
Commission (FCC) of the U.S. Government, Industry Canada
of the Canadian Government (IC), and recommended by The
Council of the European Union. The exposure standard for
wireless devices employs a unit of measurement known as
the Specific Absorption Rate, or SAR. The SAR limit set by
the FCC/IC is 1.6W/kg. The SAR limit recommended by The
Council of the European Union is 2.0W/kg. Tests for SAR are
conducted using standard operating positions specified by
the FCC/IC with the device transmitting at its highest certi-
fied power level in all tested frequency bands.
For body worn operation, the Pixavi Phone, Pixavi Thermal
and Pixavi Cam devices has been tested and meets the FCC/
IC exposure guidelines when used with an accessory that
contains no metal and that positions the device a minimum
of 10 mm from the body. Such a device can i.e. be BARTEC
PIXAVI wrist cradle or BARTEC PIXAVI belt clip.
The highest SAR value measured for the Pixavi Phone, Pixavi
Thermal and Pixavi Cam is:
Head SAR: (W/kg)
0.571
0.148
Body SAR: (W/kg)
Text must be approved and tested during FCC cert