Advertisement
FIG 1-1
INSTALL STEPS - Surface Mount (L Brackets)
Reference the illustration FIG 1-1 to confirm which components are needed for each STEP.
Items on the list are called out with brackets [X].
STEP 1 - Mount 1 Surface Mount Bracket [6] per side with the longer [7] M5x20 screws.
STEP 2 - Position the Sound Bar in place. Use a marker to identify where the mounting holes
will be located on your vehicle. Use at least 2 of the 3 holes to mount the sound bar. Confirm
there are no moving parts or wires on the other side of your mounting surface. Consider drilling
a small pilot hole.
STEP 3 - Mount the Sound Bar*
* These mounting screws are not included as different off-road or marine applications will vary.
For additional information on this and other MBQuart products, please check the SUPPORT section of our website
https://mbquart.com/support
Advertisement
