Related Manuals for Point Mobile RF900 Series
Summary of Contents for Point Mobile RF900 Series
- Page 1 UHF RFID SLED for PM90 RF900 User Manual Copyright © 2006 – 2021 Google, Android, Google Play and other marks are Point Mobile Co., Ltd. All rights reserved trademarks of Google LLC.
-
Page 2: Instruction
RFID Control Configuration Tool User Guide – describes how to use the RFID Control Configuration Tool. RF900 SKUs The contents of this manual can cover the following SKUs. Part Number RFID Engine Location SKU1 RF900-00RY-2 Impinj® Indy® R2000 SKU2 RF900-00RY-5 US, KR © 2021 Point Mobile Co., Ltd. All rights reserved... -
Page 3: Table Of Contents
Connect mode ........................14 Change connect mode......................14 Wired Communication ......................15 Disconnect .......................... 16 Auto reconnect ........................16 Bluetooth Communication ...................... 17 Connect methods ....................... 17 Disconnect .......................... 22 Reconnect .......................... 22 © 2021 Point Mobile Co., Ltd. All rights reserved... - Page 4 READ RFID TAG ..................... 32 RFID Demo ..........................32 Read the RFID Tag ........................ 33 SCAN A BARCODE ....................35 ACCESSORY ......................36 SAFETY INFORMATION ..................38 Battery Safety Information ..................... 38 © 2021 Point Mobile Co., Ltd. All rights reserved...
-
Page 5: Getting Started
Press and hold to change trigger mode, barcode scanning Trigger mode change button or RFID tag reading Trigger button Read RFID tags or barcode by pressing UHF RFID antenna Read RFID tags © 2021 Point Mobile Co., Ltd. All rights reserved... -
Page 6: Product Standard Accessories
UHF RFID SLED RF900 User Manual Getting Started Product Standard Accessories The following items are in the product box. Accessory Name Battery pack 5V / 2A power adapter AC plug USB type C cable Hand Strap © 2021 Point Mobile Co., Ltd. All rights reserved... -
Page 7: Charge The Device
UHF RFID SLED RF900 User Manual Getting Started Charge the Device Caution: Always use an original charger and cable from Point Mobile. Other chargers and cables may damage RF900. Also, make sure the connector, charger, cable is not wet. Follow the Battery Safety Information for safety of using the battery. -
Page 8: Charging With Cradle
Charge the RF900 with PM90 mounted through the cradle (Optional accessory: PM90-SSC2, PM90-SSC2-5). Place the device onto the cradle as shown in Figure 3. Note: If you use the cradle to charge, PM90 and RF900 will be charged simultaneously. © 2021 Point Mobile Co., Ltd. All rights reserved... - Page 9 Getting Started 4SBC (4 Slot Battery Cradle) 4SBC is a charging cradle for the battery of Point Mobile RFID sled models. All RFID reader's replaceable batteries can be charged with 4SBC. And the cradle can charge up to 4 batteries at the same time.
-
Page 10: Turn On/Off The Device
To turn on or off the RF900, press and hold the power button next to the LED indicator for 2 seconds (Until the RF900’s LED indicator lights on/off). Figure 5 RF900 Power button © 2021 Point Mobile Co., Ltd. All rights reserved... -
Page 11: Replace The Battery
Figure 6 Battery release button 2. Remove the battery by pulling the strap on the battery and replace the battery. Figure 7 Replace battery 3. Close the battery cover firmly until it clicks. © 2021 Point Mobile Co., Ltd. All rights reserved... -
Page 12: Led Indicator
Battery fault Alternately blinking green & red Low battery Blinking red / Charging temperature is too high or low Note: When RF900 enters sleep mode, all LED indicators will turn off. © 2021 Point Mobile Co., Ltd. All rights reserved... -
Page 13: Install Pm90
1. Insert the PM90 into the retention fixture of RF900 from the left or right side first. Figure 9 Installing PM90_1 2. Push the other side of PM90 down firmly. Figure 10 Installing PM90_2 3. To remove, hold the RF900 and pull up one side of PM90. © 2021 Point Mobile Co., Ltd. All rights reserved... -
Page 14: Connecting Pm90
Connect your PM90 and RF900, set up the configuration, and update the firmware of the RF900 using RFID Control application. The app can be downloaded from Point Mobile Service Portal website. This guide only describes a few basic features of RFID Control, so please find more detail information RFID Control User Guide. -
Page 15: Connect Mode
Bluetooth communication mode Figure 14 RFID Control - Open options Note: Disconnect current connection before changing connect mode. Connect mode change button does not work when RF900 is already connected to any PM90. © 2021 Point Mobile Co., Ltd. All rights reserved... -
Page 16: Wired Communication
- State LED of RF900 lights green - An icon indicating the RF900’s battery level is shown on the status bar Figure 16 Wired connected screen Figure 17 State LED (Wired or Bluetooth Connected) © 2021 Point Mobile Co., Ltd. All rights reserved... -
Page 17: Disconnect
Open option of RFID Control and connect mode of RF900 is set as Wired Previous connection is disconnected by removing PM90 from RF900 (If you disconnected it by toggle switch in RFID Control, Auto-reconnect does not perform.) © 2021 Point Mobile Co., Ltd. All rights reserved... -
Page 18: Bluetooth Communication
Note: NFC Tap-to-Pair or Search RFID reader NFC Tap-to-Pair: Easy automatic pairing and connection process with a single tap Search RFID reader: Normal pairing and connection process with manual steps © 2021 Point Mobile Co., Ltd. All rights reserved... - Page 19 Or before access the Tap-to-Pair screen, enable NFC by one of below ways. Settings > Connected devices > Connection preferences > NFC > enable switch Open Quick setting panel > enable NFC Figure 21 NFC_Settings Figure 20 NFC_Quick setting panel © 2021 Point Mobile Co., Ltd. All rights reserved...
- Page 20 An icon indicating the RF900’s battery level is shown on the status bar RF900’s state LED lights green Figure 24 Bluetooth connected screen Figure 25 State LED (Wired or Bluetooth Connected) © 2021 Point Mobile Co., Ltd. All rights reserved...
- Page 21 2. Tap Search RFID Reader on RFID Control Figure 26 Search RFID Reader 3. When desired RF900 name appears, stop searching by tapping STOP and select the name Figure 27 Searching RFID reader © 2021 Point Mobile Co., Ltd. All rights reserved...
- Page 22 Enabled Connect to RFID Reader toggle switch and connected RF900’s name is displayed An icon indicating the RF900’s battery level is shown on the status bar RF900’s state LED lights green © 2021 Point Mobile Co., Ltd. All rights reserved...
-
Page 23: Disconnect
Turn off the RF900 or PM90 Reconnect To reconnect to the last connected RFID reader, tap Connect to RFID Reader toggle switch and wait until the devices are connected. Figure 29 Reconnect toggle switch © 2021 Point Mobile Co., Ltd. All rights reserved... -
Page 24: Configuration Settings
0 / 1 / 2 / 3 Inventory 0 ~ 15 Param Inventory Flag A / B / A or B Config Continuous Mode Mode Continuous Mode Operation Single Mode Mode Timeout 0 ~ 120 0 (Infinite) © 2021 Point Mobile Co., Ltd. All rights reserved... - Page 25 On / Off Save Log On / Off Save tag list to csv 30 seconds 1 minute 5 minutes Sleep 10 minutes 10 minutes 30 minutes 1 hour 2 hours Reset RFID Settings © 2021 Point Mobile Co., Ltd. All rights reserved...
-
Page 26: Apply Configuration
After connecting the devices, tap to open the side menu bar and select Configuration. And then, adjust each configuration manually using RFID Control interface. Figure 31 Side menu bar - Configuration Figure 30 Configuration © 2021 Point Mobile Co., Ltd. All rights reserved... -
Page 27: Apply Via Json File
Auto Update will be performed every time RF900 is connected while RFID Control is running Auto Update setting value will be maintained until next reading JSON file - JSON file is read when RFID Control is launched without any connection with RF900 © 2021 Point Mobile Co., Ltd. All rights reserved... - Page 28 3. Tap IMPORT and wait until the process is done (There is no need to select JSON file because app will automatically find and use the Configuration.json file in the RFIDControl/RFIDJsons folder) Figure 32 RFID Control - Import Configuration © 2021 Point Mobile Co., Ltd. All rights reserved...
-
Page 29: Wedge Settings
Tab & LF Prefix (Blank) Suffix (Blank) Note: Prefix and Suffix will be added to the tag data when Configuration – Tx Data Format is set to the option including Prefix or Suffix. © 2021 Point Mobile Co., Ltd. All rights reserved... -
Page 30: Apply Wedge
Apply via JSON file in Configuration Settings. If the JSON file contains wedge setting values, Wedge settings are applied at the same time when you apply the configuration settings via the JSON file. © 2021 Point Mobile Co., Ltd. All rights reserved... -
Page 31: Firmware Update
& RFU file version is different from current RF900 firmware version Auto Update setting value will be maintained until next reading JSON file - JSON file is read when RFID Control is launched without any connection with RF900 © 2021 Point Mobile Co., Ltd. All rights reserved... -
Page 32: Manual Update
(The file must be in RFIDControl/RFIDRFUs folder.) Figure 35 RFID Control – Update RFID F/W 4. Select the RFU file and Tap UPDATE NOW 5. Wait until the update process is done © 2021 Point Mobile Co., Ltd. All rights reserved... -
Page 33: Read Rfid Tag
There are two ways to launch RFID Demo, Tap RFID Demo from App drawer or EmKit Open the side menu bar on the RFID Control and tap Launch RFID Demo App drawer EmKit RFID Control © 2021 Point Mobile Co., Ltd. All rights reserved... -
Page 34: Read The Rfid Tag
Read RFID tags after connecting the RF900 to your PM90. To read RFID tags, aim the tag and then press the trigger button of RF900 or tap the Read RFID Tag button on the screen. Figure 39 Reading RFID tag Figure 38 RFID Demo - Read tag © 2021 Point Mobile Co., Ltd. All rights reserved... - Page 35 For demonstrating barcode scan function, use Scan Demo application. to sort the delivered tag data in order and tap to clear the tag data. Figure 41 RFID Demo - Read tags © 2021 Point Mobile Co., Ltd. All rights reserved...
-
Page 36: Scan A Barcode
Figure 43 Trigger-Mode LED (Barcode scan mode) 2. Execute Scan Demo or scanner application, and then scan a barcode by pressing the trigger button of RF900. 3. Check the barcode information displayed on the app. © 2021 Point Mobile Co., Ltd. All rights reserved... -
Page 37: Accessory
A hand strap is enclosed in the RF900 package. Attach the strap and carry the reader more comfortably. Figure 44 Hand strap To attach the hand strap, 1. Thread the strap through the hand strap hole next to the USB connector. Figure 45 Attach hand strap_1 © 2021 Point Mobile Co., Ltd. All rights reserved... - Page 38 UHF RFID SLED RF900 User Manual Accessory 2. Slide the strap through the buckle at the appropriate length. Figure 46 Attach hand strap_2 © 2021 Point Mobile Co., Ltd. All rights reserved...
-
Page 39: Safety Information
Improper battery usage may result in an explosion, fire, or other critical hazards. Battery Usage & Disposal Guidelines 1. Use only Point Mobile approved batteries and charging accessories. Other batteries and charger may damage the device. 2. Do not disassemble or modify the battery. Do not bend, shred, deform the battery. - Page 40 Notice: The battery is consumable goods. Point Mobile provides warranty for battery in 6 months after purchase. If you suspect the battery swelling, change the battery and contact Point Mobile to use safely. © 2021 Point Mobile Co., Ltd. All rights reserved...
Need help?
Do you have a question about the RF900 Series and is the answer not in the manual?
Questions and answers