Advertisement
7
Feed Di2 wires through the barstem.
9
Apply assembly compound on the
steerer tube and slide the barstem
onto the fork steerer.
12
Note that the notch on top cap sits in
between the slot on the back of the
barstem.
All manuals and user guides at all-guides.com
Assembly Instructions
10
Insert anti-compression plug into the
gap in front of the fork steerer and the
apply assembly compound around it.
13
Preload the headset to remove excess
play.
2
D-Fork
8
Feed brake hoses through the barstem.
11
Install the top cap cover.
14
Torque the barstem to 5.2Nm
Rev3
Advertisement
