Advertisement
Quick Links
0
3mm
1
Precut fork steerer making sure that it
is cut 3mm below the top of the stem.
4
Slide compression ring into place.
All manuals and user guides at all-guides.com
Assembly Instructions
2
Install rear brake caliper, routing
brake hose through downtube exiting
from top of headtube. Slide foam tube
through the brake hose making sure it
sits in the middle of the downtube.
5
Make sure the slot on the compres-
sion ring is facing the back of the
steerer.
1
D-Fork
3
Assemble both top and bottom
headset bearing and slide fork
steerer, brake hose and Di2 wires
through top bearing.
6
Assemble the appropriate top bearing
cover, spacers and stem spacer.
Rev3
Advertisement
Related Manuals for Factor D-Fork
Summary of Contents for Factor D-Fork
- Page 1 All manuals and user guides at all-guides.com D-Fork Assembly Instructions Precut fork steerer making sure that it Install rear brake caliper, routing Assemble both top and bottom is cut 3mm below the top of the stem. brake hose through downtube exiting headset bearing and slide fork from top of headtube.
- Page 2 All manuals and user guides at all-guides.com D-Fork Assembly Instructions Feed Di2 wires through the barstem. Feed brake hoses through the barstem. Apply assembly compound on the Insert anti-compression plug into the Install the top cap cover. steerer tube and slide the barstem gap in front of the fork steerer and the onto the fork steerer.