Table of Contents
Advertisement
TECHNICAL DATA
Rated voltage
No-load speed
Blade length
Cutting capacity
Weight (without battery back)
Weight with heaviest battery pack
Noise emission values determined according to EN 60745-1 and EN 60745-2-15
Sound pressure level at operator's position
Uncertainty
A-weighted sound power level
Uncertainty
Vibration total values determined according to EN 60745-1 and EN 60745-2-15
Vibration emission value
Front handle
Rear handle
Uncertainty
*SPM (strokes per minute) is the number of strokes the connecting rod completes in one minute.
WARNING!
The declared vibration value has been measured with a standard test method and may be used to compare one tool with another.
The declared vibration value may be used in a preliminary assessment of exposure.
The vibration emission during actual use of power tool can differ from the declared total value depending on the ways in which the tool is used.
Identify safety measures to protect yourself based on an estimation of exposure in the actual conditions of use, taking account of all parts of the operating cycle
such as the times when the tool is switched off and when it is running idle in addition to the trigger time.
BATTERY AND CHARGER
Model
AHT1852B
Battery pack
-
Charger
-
L1815G, L1815R, L1820R, L1820S, L1820SHD, A18FB2, L1825R,
Compatible
L1830R, L1830RHD, L1830R-X5, L1840R, L1840S, A18B4,
battery
L1840SHD, A18FB4, L1850R, L1850R-X5, L1850SHD, A18FB5,
packs
L1860R, L1860RHD, L1860B, L1860R-X5, L1890R, L1890RHD
Compatible
BL1218, BLK1218, BL18DP-X5, AL1218G, AL18G, BL18S
chargers
REPLACEMENT PARTS
Blade
INTENDED USE
The cordless hedge trimmer is intended only for outdoor use. For safety
reasons, the product must be adequately controlled by using a two-handed
operation. It should be used in dry, well-illuminated conditions.
The product is intended to cut and trim hedges, shrubs, and similar vegetation.
It is not intended to cut grass, trees, or branches. Do not use the product for
any other purpose.
CORDLESS HEDGE TRIMMER
A18FHTR14
A18FB4
BL1218
AAHT18B
21
GENERAL PRODUCT SAFETY WARNINGS
WARNING! Read all safety warnings and all instructions. Failure to
follow the warnings and instructions may result in electric shock, fire and/or
serious injury. Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your mains-operated (corded)
product or battery-operated (cordless) product.
WORK AREA SAFETY
Keep work area clean and well lit. Cluttered or dark areas invite accidents.
Do not operate power tools in explosive atmospheres, such as in the
presence of flammable liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
Keep children and bystanders away while operating a power tool.
Distractions can cause you to lose control.
ELECTRICAL SAFETY
Power tool plugs must match the outlet. Never modify the plug in any
way. Do not use any adapter plugs with earthed (grounded) power tools.
Unmodified plugs and matching outlets will reduce risk of electric shock.
Avoid body contact with earthed or grounded surfaces, such as pipes,
radiators, ranges and refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded
Do not expose power tools to rain or wet conditions. Water entering a
power tool will increase the risk of electric shock.
Do not abuse the cord. Never use the cord for carrying, pulling or
unplugging the power tool. Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords increase the risk of electric shock.
When operating a power tool outdoors, use an extension cord suitable
for outdoor use. Use of a cord suitable for outdoor use reduces the risk of
electric shock
AHT1852B/A18FHTR14
18 V d.c.
2700 min
-1
(SPM)
550 mm
26 mm
3.0 kg
4.2 kg
= 79.0 dB(A)
L
pA
K = 2.5 dB
= 89.4 dB(A)
L
WA
K = 2.2 dB
a
= 2.3 m/s
2
h
a
= 4.3 m/s
2
h
K = 1.5 m/s
2
21
Advertisement
Table of Contents
