Related Manuals for Velatia Ormazabal cgmcosmos
Summary of Contents for Velatia Ormazabal cgmcosmos
- Page 1 Outdoor cubicles cgmcosmos, cgm.3 and cgm.800 systems according to IEEE and CSA standards General Instructions IG-313-EN, version 02, 27/10/2022...
- Page 2 CAUTION! When medium-voltage equipment is operating, certain components are live, other parts may be in movement and some may reach high temperatures. Therefore, the use of this equipment poses electrical, mechanical and thermal risks. In order to ensure an acceptable level of protection for people and property, and in compliance with applicable environmental recommendations, Ormazabal designs and manufactures its products according to the principle of integrated safety, based on the following criteria: •...
-
Page 3: Table Of Contents
General Instructions Table of Contents Outdoor cubicles: cgmcosmos, cgm.3 and cgm.800 systems according to IEEE and CSA standards Table of Contents 1. General description ...........4 1.1. Models ........4 1.2. -
Page 4: General Description
General description General Instructions Outdoor cubicles: cgmcosmos, cgm.3 and cgm.800 systems according to IEEE and CSA standards General description Ormazabal's outdoor cubicle systems, formed by different This document supplements general configurations, are designed following the requirements instructions of the switchgear system of the cubicles, set out in IEEE C37.20.9 and CSA C22.2 Nº31-18 standards. -
Page 5: Main Components
General Instructions General description Outdoor cubicles: cgmcosmos, cgm.3 and cgm.800 systems according to IEEE and CSA standards 1.2. Main components cgmcosmos, cgm.3 or cgm.800 cubicles Cable compartment cover External enclosure Doors External enclosure bottom cover Figure 1.1. Main components outdoor cubicles 1.2.1. -
Page 6: Ratings Table
General description General Instructions Outdoor cubicles: cgmcosmos, cgm.3 and cgm.800 systems according to IEEE and CSA standards 1.3. Ratings table Rated voltage [kV] Internal arc classification according to IEEE C 37.20.7* Type 2B 25 kA (1 s) IP rating: external enclosure according to IEC 60529 IP 56** Enclosure Nema certified according to ANSI / UL50E Standard unit colour [RAL]... - Page 7 General Instructions General description Outdoor cubicles: cgmcosmos, cgm.3 and cgm.800 systems according to IEEE and CSA standards Weight Gases to trench Upwards gases System Model Configuration (kg) (kg) [pounds] [pounds] (606) (687) -2lv / -rbvl / -rbvrb LVL / RbVL / RbVRb [1336] [1515] (710)
-
Page 8: Operating Conditions
General description General Instructions Outdoor cubicles: cgmcosmos, cgm.3 and cgm.800 systems according to IEEE and CSA standards 1.5. Operating conditions Installation Outdoor Maximum ambient temperature + 40 °C Minimum ambient temperature - 30 °C Maximum mean ambient temperature, measured over a 24-hour period + 35 °C Maximum mean relative humidity, measured over a 24-hour period <... -
Page 9: Handling And Transport
General Instructions Handling and transport Outdoor cubicles: cgmcosmos, cgm.3 and cgm.800 systems according to IEEE and CSA standards Handling and transport Important: During transport, the switchgear must be perfectly seated and fixed so that it cannot move about and possibly damage the equipment. 2.1. -
Page 10: Transport
Handling and transport General Instructions Outdoor cubicles: cgmcosmos, cgm.3 and cgm.800 systems according to IEEE and CSA standards 2.2. Transport 2.2.1. Road haulage Transport is carried out on a standard truck or crane truck Packaging for road haulage platform. The outdoor units are supplied from the factory on a pallet Securing the unit to the truck's platform using slings is that is larger than the dimensions of the unit. -
Page 11: Storage
General Instructions Storage Outdoor cubicles: cgmcosmos, cgm.3 and cgm.800 systems according to IEEE and CSA standards Storage 6. The switchgear must be protected from the rain, and If it needs to be stored, the equipment must be placed on dry ground or on top of damp-proof insulating material, still the humidity conditions must be as follows: in its original packaging. -
Page 12: Installation
Installation General Instructions Outdoor cubicles: cgmcosmos, cgm.3 and cgm.800 systems according to IEEE and CSA standards Installation 4.1. Unpacking the equipment 3. Detach the white polystyrene corner pieces. The outdoor cubicles are supplied protected in plastic as standard. 4. Unscrew the fixings between the base and the pallet. 5. - Page 13 General Instructions Installation Outdoor cubicles: cgmcosmos, cgm.3 and cgm.800 systems according to IEEE and CSA standards Fastening outdoor cubicles with upwards gas output to the floor / Fastening outdoor cubicles with upwards gas output to the floor and cables 45° to the skid Outdoor cubicles with upwards gas output must be For other configurations, please contact Ormazabal's anchored to the floor of the facility in place at least in four...
- Page 14 Installation General Instructions Outdoor cubicles: cgmcosmos, cgm.3 and cgm.800 systems according to IEEE and CSA standards Figure 4.3. cgm.3/cgm.800-lvll Figure 4.6. cgm.3/cgm.800-lvrbv 45° Figure 4.4. cgm.3/cgm.800-lvlv Figure 4.7. cgm.3/cgm.800-lvl rbvrb rbvl 45° Figure 4.5. cgm.3/cgm.800-lvv IG-313-EN version 02; 27/10/2022...
-
Page 15: Earthing The Equipment
General Instructions Installation Outdoor cubicles: cgmcosmos, cgm.3 and cgm.800 systems according to IEEE and CSA standards Figure 4.8. cgmcosmos-lvl Figure 4.10. cgmcosmos-lvll Figure 4.9. cgmcosmos-lvll 4.3. Earthing the equipment In outdoor cubicles, connect the earting bar inside the This document supplements general cable compartment. -
Page 16: Recommended Sequence Of Operations
Recommended sequence of operations General Instructions Outdoor cubicles: cgmcosmos, cgm.3 and cgm.800 systems according to IEEE and CSA standards Recommended sequence of operations 5.1. Access to the driving mechanism and cable compartment Proceed as follows to access the cubicle cable compartment and driving mechanism: 1. - Page 17 General Instructions Recommended sequence of operations Outdoor cubicles: cgmcosmos, cgm.3 and cgm.800 systems according to IEEE and CSA standards 2. Release the two bolts at the top and bottom of the right-hand door. Figure 5.2. Interior bolt position in the right-hand door 3.
-
Page 18: Operations Sequence For Replacing
Recommended sequence of operations General Instructions Outdoor cubicles: cgmcosmos, cgm.3 and cgm.800 systems according to IEEE and CSA standards 5.2. Operations sequence for replacing cubicles on site The following sequence describes the operations to be followed for dismantling and removing the external enclosure. - Page 19 General Instructions Recommended sequence of operations Outdoor cubicles: cgmcosmos, cgm.3 and cgm.800 systems according to IEEE and CSA standards 3. From inside the cable compartment, unscrew the 12 DIN933M8 hex bolts (6 on each side) that secure the cubicles to the external enclosure. Tool: 13 open-end wrench.
-
Page 20: Maintenance
Maintenance General Instructions Outdoor cubicles: cgmcosmos, cgm.3 and cgm.800 systems according to IEEE and CSA standards Maintenance In order to offer an outdoor solution, Ormazabal's cubicles For other categories of corrosiveness and/or durability, are fitted with a galvanised sheet metal enclosure painted please contact Ormazabal's Technical Department. -
Page 21: Cleaning And Maintenance
General Instructions Maintenance Outdoor cubicles: cgmcosmos, cgm.3 and cgm.800 systems according to IEEE and CSA standards 6.1.2. Cleaning and maintenance Cleaning is understood to be the action and effect of Maintenance is understood as the series of actions or removing any dirt, dust and/or contamination deposited activities to be undertaken in order to ensure that any unit on the surface to be cleaned as it is detrimental and causes or machine continues to perform the desired functions. -
Page 22: Paint Repair Procedure
Maintenance General Instructions Outdoor cubicles: cgmcosmos, cgm.3 and cgm.800 systems according to IEEE and CSA standards 6.2. Paint repair procedure 6.2.1. General aspects Bangs to the components to be assembled must be avoided Any damage that occurs during transport, installation during handling (falls, chafing, etc.) and assembly (hammer or commissioning must be repaired. -
Page 23: Instructions For Repairing Damage Or
General Instructions Maintenance Outdoor cubicles: cgmcosmos, cgm.3 and cgm.800 systems according to IEEE and CSA standards 6.2.2. Instructions for repairing damage or areas affected by rust 5. In the case of areas affected by rust, a medium-hard hand brush can be used to eliminate rust on flat areas. Figure 6.1. - Page 24 Maintenance General Instructions Outdoor cubicles: cgmcosmos, cgm.3 and cgm.800 systems according to IEEE and CSA standards 8. Repainting The paint for this type of equipment consists 9. Sealing. Finally, the affected areas are sealed with SIKA of a Europolveri primer with a high Zn content, followed when the paint is dry (24h).
-
Page 25: Spares And Accessories
General Instructions Spares and accessories Outdoor cubicles: cgmcosmos, cgm.3 and cgm.800 systems according to IEEE and CSA standards Spares and accessories Although the cubicles have been designed for a service life Driving mechanisms -2lv in accordance with IEEE C37.20.9, certain components can Outdoor cubicle enclosure hinge be replaced and installed for various reasons. - Page 26 Notes General Instructions Outdoor cubicles: cgmcosmos, cgm.3 and cgm.800 systems according to IEEE and CSA standards Notes IG-313-EN version 02; 27/10/2022...
- Page 28 Subject to change Ormazabal without prior notice. y Cía. For further information, IGORRE please ask Ormazabal. Spain www.ormazabal.com...
Need help?
Do you have a question about the Ormazabal cgmcosmos and is the answer not in the manual?
Questions and answers