Subscribe to Our Youtube Channel
Related Manuals for Velatia Ormazabal gmcosmos
Summary of Contents for Velatia Ormazabal gmcosmos
- Page 1 Outdoor cubicles cgmcosmos, cgm.3 and cgm.800 systems General Instructions IG-305-EN, version 01, 07/04/2020...
- Page 2 CAUTION! When medium-voltage equipment is operating, certain components are live, other parts may be in movement and some may reach high temperatures. Therefore, the use of this equipment poses electrical, mechanical and thermal risks. In order to ensure an acceptable level of protection for people and property, and in compliance with applicable environmental recommendations, Ormazabal designs and manufactures its products according to the principle of integrated safety, based on the following criteria: •...
-
Page 3: Table Of Contents
General Instructions Contents Outdoor cubicles: cgmcosmos, cgm.3 and cgm.800 systems Contents 1. General description ...........4 1.1. Models ........4 1.2. -
Page 4: General Description
General description General Instructions Outdoor cubicles: cgmcosmos, cgm.3 and cgm.800 systems General description Ormazabal's outdoor cubicle systems, formed by di erent con gurations, are designed following the requirements set out in International Electrotechnical Committee (IEC) standards. This GI document supplements the general instructions of the switchgear system of the cubicles, namely the IG-078 in the case of cgm, IG-136 in the case of cgm.3, or IG-284 in the case of cgm.800. -
Page 5: Main Components
General Instructions General description Outdoor cubicles: cgmcosmos, cgm.3 and cgm.800 systems 1.2. Main components cgmcosmos, cgm.3 or cgm.800 cubicles Cable compartment cover External enclosure Doors External enclosure bottom cover Figure 1.1. Main components outdoor cubicles 1.2.1. Name plate Every unit includes a name plate, with some of the following data: Figure 1.2. -
Page 6: Ratings Table
General description General Instructions Outdoor cubicles: cgmcosmos, cgm.3 and cgm.800 systems 1.3. Ratings table Rated voltage [kV] 40.5 Internal arc classi cation according to IEC 62271-200* IAC AF 25 kA (1 s) IAC AFL 25 kA (1 s) IAC AFLR 25 kA (1 s) IP rating: external enclosure IP 54**... -
Page 7: Dimensions And Weights
General Instructions General description Outdoor cubicles: cgmcosmos, cgm.3 and cgm.800 systems 1.4. Dimensions and weights Figure 1.3. Outdoor cubicle dimensions Width (a) Depth (f) Height (h) Weight Cubicle Model Con guration [mm] [mm] [mm] [kg] -2lv 1558 1026 1889 -3lv LVLL 1978 1026... -
Page 8: Operating Conditions
General description General Instructions Outdoor cubicles: cgmcosmos, cgm.3 and cgm.800 systems 1.5. Operating conditions Installation Outdoor Maximum ambient temperature + 40 °C Minimum ambient temperature - 5 °C /- 30 °C Maximum mean ambient temperature, measured over a 24-hour period + 35 °C Maximum mean relative humidity, measured over a 24-hour period <... -
Page 9: Handling And Transport
General Instructions Handling and transport Outdoor cubicles: cgmcosmos, cgm.3 and cgm.800 systems Handling and transport Important: During transport, the switchgear must be perfectly seated and xed so that it cannot move about and possibly damage the equipment. 2.1. Lifting equipment The switchgear must always be kept upright, directly on the ground or on a pallet, depending on the type of handling involved. -
Page 10: Transport
Handling and transport General Instructions Outdoor cubicles: cgmcosmos, cgm.3 and cgm.800 systems 2.2. Transport 2.2.1. Road haulage Transport is carried out on a standard truck or crane truck Packaging for road haulage platform. The outdoor units are supplied from the factory on a pallet Securing the unit to the truck's platform using slings is that is larger than the dimensions of the unit. -
Page 11: Storage
General Instructions Storage Outdoor cubicles: cgmcosmos, cgm.3 and cgm.800 systems Storage 6. The switchgear must be protected from the rain, and If it needs to be stored, the equipment must be placed on dry ground or on top of damp-proof insulating material, still the humidity conditions must be as follows: in its original packaging. -
Page 12: Installation
Installation General Instructions Outdoor cubicles: cgmcosmos, cgm.3 and cgm.800 systems Installation 4.1. Unpacking the equipment 3. Detach the white polystyrene corner pieces. The outdoor cubicles are supplied protected in plastic as standard. 4. Unscrew the xings between the base and the pallet. 5. - Page 13 General Instructions Installation Outdoor cubicles: cgmcosmos, cgm.3 and cgm.800 systems Fastening outdoor cubicles with upwards gas output to the floor Outdoor cubicles with upwards gas output must be Cubicle Module Con guration anchored to the oor of the facility with four M12 bolts, -2lv 1386 using the points prepared for this purpose in the base of...
-
Page 14: Earthing The Equipment
Installation General Instructions Outdoor cubicles: cgmcosmos, cgm.3 and cgm.800 systems Figure 4.5. Anchoring diagram cgm.3/cgm.800-2l2v with upwards gas Figure 4.7. Anchoring diagram outdoor cgmcosmos-3lv with upwards output gas output Figure 4.6. Anchoring diagram outdoor cgmcosmos-2lv with upwards Figure 4.8. Anchoring diagram outdoor cgmcosmos-2l2v with upwards gas output gas output 4.3. -
Page 15: Recommended Sequence Of Operations
General Instructions Recommended sequence of operations Outdoor cubicles: cgmcosmos, cgm.3 and cgm.800 systems Recommended sequence of operations 5.1. Access to the driving mechanism and cable compartment Proceed as follows to access the cubicle cable compartment and driving mechanism: 1. Turn both handles 90° with the key provided. Figure 5.1. - Page 16 Recommended sequence of operations General Instructions Outdoor cubicles: cgmcosmos, cgm.3 and cgm.800 systems 2. Release the two bolts at the top and bottom of the right-hand door. Figure 5.2. Interior bolt position in the right-hand door 3. Remove the 4 vandal-proof screws in the bottom cover. Tool: 40 Thorsen key with hole.
-
Page 17: Operations Sequence For Replacing Cubicles
General Instructions Recommended sequence of operations Outdoor cubicles: cgmcosmos, cgm.3 and cgm.800 systems 5.2. Operations sequence for replacing cubicles on site The following sequence describes the operations to be followed for dismantling and removing the external enclosure. 1. Follow steps 1 to 3 in the above sequence for access to the driving mechanisms and cable compartment. - Page 18 Recommended sequence of operations General Instructions Outdoor cubicles: cgmcosmos, cgm.3 and cgm.800 systems 3. From inside the cable compartment, unscrew the 12 DIN933M8 hex bolts (6 on each side) that secure the cubicles to the external enclosure. Tool: 13 open-end wrench. If a relief duct is tted, also unscrew the 12 M8 bolts (DIN 933) for anchoring the assembly to the relief duct, located at the bottom rear.
-
Page 19: Maintenance
General Instructions Maintenance Outdoor cubicles: cgmcosmos, cgm.3 and cgm.800 systems Maintenance In order to o er an outdoor solution, Ormazabal's cubicles For other categories of corrosiveness and/or durability, are tted with a galvanised sheet metal enclosure painted please contact Ormazabal's Technical Department. in RAL 7035 polyester powder for outdoors, with corrosion category C5, according to Standard ISO 12944-2, and high durability (H), according to standard ISO 12944-1. -
Page 20: Cleaning And Maintenance
Maintenance General Instructions Outdoor cubicles: cgmcosmos, cgm.3 and cgm.800 systems 6.1.2. Cleaning and maintenance Cleaning is understood to be the action and e ect of Maintenance is understood as the series of actions or removing any dirt, dust and/or contamination deposited activities to be undertaken in order to ensure that any unit on the surface to be cleaned as it is detrimental and causes or machine continues to perform the desired functions. -
Page 21: Paint Repair Procedure
General Instructions Maintenance Outdoor cubicles: cgmcosmos, cgm.3 and cgm.800 systems 6.2. Paint repair procedure 6.2.1. General aspects Bangs to the components to be assembled must be avoided Any damage that occurs during transport, installation during handling (falls, cha ng, etc.) and assembly (hammer or commissioning must be repaired. -
Page 22: Instructions For Repairing Damage Or Areas
Maintenance General Instructions Outdoor cubicles: cgmcosmos, cgm.3 and cgm.800 systems 6.2.2. Instructions for repairing damage or areas affected by rust 5. In the case of areas a ected by rust, a medium-hard hand brush can be used to eliminate rust on at areas. Figure 6.1. - Page 23 General Instructions Maintenance Outdoor cubicles: cgmcosmos, cgm.3 and cgm.800 systems 8. Repainting The paint for this type of equipment consists 9. Sealing. Finally, the a ected areas are sealed with SIKA of a Europolveri primer with a high Zn content, followed when the paint is dry (24h).
-
Page 24: Spares And Accessories
Spares and accessories General Instructions Outdoor cubicles: cgmcosmos, cgm.3 and cgm.800 systems Spares and accessories Although the cubicles have been designed for a service life Driving mechanisms -2lv in accordance with IEC 62271-200, certain components can Outdoor cubicle enclosure hinge be replaced and installed for various reasons. - Page 25 General Instructions Notes Outdoor cubicles: cgmcosmos, cgm.3 and cgm.800 systems Notes IG-305-EN version 01; 07/04/2020...
- Page 26 Notes General Instructions Outdoor cubicles: cgmcosmos, cgm.3 and cgm.800 systems Notes IG-305-EN version 01; 07/04/2020...
- Page 28 Subject to change Ormazabal without prior notice. y Cía. For further information, IGORRE please ask Ormazabal. Spain www.ormazabal.com...
Need help?
Do you have a question about the Ormazabal gmcosmos and is the answer not in the manual?
Questions and answers