FALK FLEX, NEO Quick Start Guide

Device description

1. Screen: Displays the Falk Navigator software. By tapping on it you can select menu commands or enter information.
   
   Do not touch the display with angled or sharp objects to prevent damage.
2. On/Off switch:
   Switches the device on. If you activate the On/Off switch during use, the device switches to stand-by. The current navigation is retained. If you press it again, the device is ready for use again straight away. Pressing it for 5 seconds will switch the device off completely.
3. Loudspeaker: Issues spoken instructions and warnings.
4. Magnet: Magnet for fixing the device in the holding bracket.
5. Micro USB port: Port for the USB cable for connecting to a PC Do not install the device Do not place the device or for connecting the car charger cable. where it may restrict the onto the dashboard driver's field of vision. unattached.
   Note: TMC messages are also received via the car charger cable.
6. Micro SD slot: Slot for receiving a micro SD card with a max. memory capacity of 32 GB.

Assembly

Optional:

With some devices (refer to packaging), the power may also be supplied to the device via the back of the holding bracket.

Mounting

To secure the holding bracket, place the suction cup on the disc and press the lever on the holding bracket towards the disc.
To release the holding bracket, pull the lever back towards you and pull on the small rubber tab.

• Do not install the device where it may restrict the driver's field of vision.
• Do not place the device onto the dashboard unattached.
• Do not mount the device on airbag covers.
• Do not mount the device where airbags may deploy.

To supply your device with power as you are travelling along, insert the small connector of the car charger cable which is also supplied with the product into the micro USB port (5) of the device and the large connector into your car's cigarette lighter.

Navigation view

1. Info line: Name (or number) of the next street
2. Status symbols: Profile, compass, GPS reception, battery, speed camera detector (optional)
3. Route to be travelled (thick blue line)
4. Map
5. TMC status:
   grey = no reception; green = no hold-ups;
   yellow = warning of traffic on the calculated route; red = traffic hold-up or hazard on the calculated route
6. Rapid access menu: rapid access to certain functions
7. Info box: By tapping on it you can select which figures should be displayed here
8. Current position
9. Info box: By tapping on it you can select which figures should be displayed here
10. Volume
11. Menu button: switches to the menu
12. Manoeuvre arrow: shows the next manoeuvre
13. Speed warner: if activated, the current maximum speed limit is displayed. If it is exceeded, your current speed appears below it.
14. Zoom button: Activates the zoom function. You can use the +/- buttons to zoom in and out of the map extract which is shown. If you tap on the bird, the bird's-eye perspective of the entire route is displayed.

Service & support

If you have any problems with your device, you can make use of our telephone support.
Germany:
For expert advice, help with getting started or configuration: 0900 132 55 00 (0.89 EUR/min. from a German landline, mobile phone prices may differ.)
For questions about the guarantee and warranty:
01805 32 55 46 (0.14 EUR/min. from a German landline, mobile phone prices may differ [max. 0.42 EUR/min.])
Switzerland: 0848 20 12 12 (0.11 SFR/min.)
Austria: 0820 20 12 12 (0.15 EUR/min.)