Atomi smart LED Spot Lights Quick Start Guide

Get the app

Download the Atomi Smart app from the App Store or Google Play.

Register

Follow the on-screen instructions and register an account.

Add your Smart Bridge

Press "Add Device" or the "+" sign and choose the Smart Bridge to install from the device list.

Turn your phone's Bluetooth ON

Connect the Smart Bridge to the USB wall charger and plug it into the outlet.

Press "Continue" on the Atomi Smart app.

For a smooth connection, do not add the Smart Spot Lights now. You will be prompted to do so on Step 7.

Select the right network

Enter your WiFi password and "Continue".

Make sure you're connected to a 2.4GHz WiFi network (Atomi Smart can't connect to 5GHz networks).

Turn on the Smart Spot Lights

Then open the Smart Bridge device that you added on the Atomi Smart app home screen.

Add your Smart Spot Lights

Press "Add new device".

If you have already added the device on Step 4, press "Add existing device".

Follow the on-screen instructions.

Troubleshooting

Smart WiFi
LED Spot Lights

The app can't find my smart device.
Please reset your device.

For Smart Bridge: Make sure that your phone's Bluetooth is turned ON and the permission settings are allowing the app to connect via Bluetooth.

For Smart Spot Lights: Press and hold the "Power" button until the light starts flashing to reset your device".

My WiFi network doesn't appear in the Atomi Smart app.
Use your smartphone to confirm that you have at least two WiFi bars in the vicinity of your Atomi Smart device. If not, move your Atomi Smart device closer to your router. (The list will refresh every 10 seconds).

Cannot connect to my WiFi network.
Make sure that you have entered the correct WiFi password during setup. Check if there are problems with your internet connection. If the WiFi signal is too weak, reset your WiFi router and try again.

I'm getting "Failed to Add Device", "Failed to find router" or "DHCP" error

• Confirm that your phone is connected to a 2.4GHz WiFi network.
• Check whether the router password you entered is correct.
• Confirm that the DHCP service is enabled on your router settings
• Make sure that your WiFi signal is strong
• Temporarily disable your 5GHz network
• If you have a mesh network/router that does not allow you to disable 5GHz, try to move farther away from your router until your phone moves to the 2.4GHz band
• For more Connection Troubleshooting tips, visit atomismart.com/connection-troubleshooting/

My Atomi Smart device appears as "Unavailable" in the app.
Refresh the device list.

I just replaced my router.
If you replace your router, you will need to reset your devices and add them again to the app.

Can the cords be buried?
Yes, cords can be buried.

How to control multiple lights simultaneously?

• Open the Atomi Smart app and select one of the spot lights that you've added
• Press the 'Edit' button on the top-right corner of the screen
• Press 'Create Group' and select your lights
• Press 'Save'. You can now control your spot lights simultaneously

For more information about app and device features, tutorials and troubleshooting tips go to: www.atomismart.com/helpSpotLights

Still can't connect?
Need assistance?

Our friendly customer service team will work hard to put a smile back on your face.
Here's how we can connect.

1-800-757-1440
Mon-Fri 9:00-5:00 EST (US)

or support@atomiusa.com

Welcome to the Atomi Smart family!
We know you will love our products so much that we are giving you an exclusive 15% off your next purchase on atomismart.com.

Log onto https://atomismart.com/shop-now/

Add to Cart

Enter promo code ATOMI15OFF

Proceed to checkout

Free shipping on orders over $50
*within the contiguous US only*

Terms and conditions apply