HEADRUSH HRS 5017 - Wireless Sport Earbuds Manual

INTRODUCTION

Thank you for purchasing the HRS 5017 Earbuds. In order to maximize your listening experience please read the following instructions.

1. LED indicator
2. Decrease volume/previous track
3. + Increase volume/next track
4. MFB (multi-function button)
5. Micro USB charging port
6. Microphone

Additional large and small ear tips included (medium tips installed on earbuds).

WHAT'S INCLUDED

• HRS 5017 Earbuds
• Set of ear tips: Small, medium and large
• Micro USB charging cable
• Carry case
• Instruction manual

CHARGING

Fully charge your earbuds before your first use.

• The earbuds will beep every 60 seconds and the red LED will flash every few seconds to indicate low battery
• Plug the micro USB cable into the micro USB port or to a USB compatible car or wall charger
• The red LED will be ON when the earbuds are charging, even while the earbuds are turned OFF
• The blue LED will turn ON when charging is complete
• Charging time is approximately 2 hours

NOTE: If the earbuds are not charged for a long time, the battery life will be greatly reduced. We recommend that you charge your earbuds at least once every three months.

BATTERY CAPACITY STATUS

When the earbuds are connected to an iOS^® device, the earbud battery status will appear in the upper right-hand corner of the device. When the battery icon is red, please charge the earbuds.

PAIRING

Pairing with one smartphone or other device:

• Press and hold the MFB button to turn the earbuds ON and enter into pairing mode or reconnect with the previously paired device
• The earbuds will beep and the red LED and blue LED will flash alternately when in pairing mode
• Locate the Bluetooth^® settings in your device and search for the earbuds
• From the list of found devices, select "HRS 5017" and connect to it
• Follow the instructions and enter "0000" as PIN if required
• Bluetooth^® will connect automatically

FIT

We recommend that you try each ear tip (small, medium and large), then perform a sound check and choose the combination that provides the best sound experience.

• Put the earbuds in your ears (L in left ear and R in right ear) and adjust the position for maximum comfort and fit
• Adjust ear hooks to achieve optimal fit and stability
• Drape the earbuds around the back of your neck
  

OPERATING INSTRUCTIONS

NOTE: The function compatibility may vary among different smartphones or devices. Not all functions are available on all devices.

For optimal call quality, please place the microphone as close to your mouth as possible. Some calls will automatically go to your mobile device.

Simply use the call switch function on your mobile device to switch the call to your earbuds. Please read your device's instruction manual.

PLAYING MUSIC

NOTE: Remote functions (next track, previous track, pause, restore) require that the paired Bluetooth^® device supports AvRCP.

LED INDICATOR

RESTORE FACTORY SETTINGS

• In Bluetooth^® connected mode press and hold the MFB button and
• Decrease volume/previous track button for 5 seconds. The earbuds will beep once reset is successful.

NOTE: After factory settings have been restored, the earbud's pairing list will be eliminated. You will need to re-pair with your devices.

CLEANING

Your earbuds may require periodic cleaning. Remove the tips from the earbuds and wash them with a mild detergent and water. Make sure the tips are dry before putting them back on the earbuds.

IMPORTANT SAFETY INFORMATION

• Keep in a safe place free from dust, liquid and extreme temperatures
• Do not attempt to disassemble the product
• Do not use chemicals to clean the product

• Do not insert plug into electric outlets
• Supervise children when using equipment, this product is not a toy
• Listening to headphones at high volume levels– particularly, over extended periods of time–may damage your hearing
• If you have a pacemaker or other electrical medical devices, you should consult your physician before using this product
• The operation of switching on your Hi-Fi system or plugging in the earbuds may cause clicks which at high volume setting may affect your hearing. Therefore, always set the volume control to minimum before switching between different sources (tuner, turntable, CD player, etc.) or plugging in the earbuds
• DO NOT use earbuds while driving or cycling
• The small parts included with this product can be a choking hazard. This product is not intended for use by small children and should be kept away from children under 3 years of age

TROUBLESHOOTING

No sound

• Power ON the earbuds and charge the battery
• Increase the volume on your earbuds and Bluetooth^® device
• Make sure you are using the correct paired device
• Move your Bluetooth^® device closer to the earbuds and away from any interference or obstructions
• Use a different music source
• Pair a different Bluetooth^® device
• If two Bluetooth^® devices are connected, pause the first device and play the other device
• If two Bluetooth^® devices are connected, move the devices within range of the earbuds

Poor sound quality

• Use a different music source
• Pair a different Bluetooth^® device
• Disconnect the second device
• Move the Bluetooth^® device closer to the earbuds, and away from any interference or obstructions
• Clear any debris or wax buildup from the earbuds and headphone nozzles

Earbuds don't turn oN

• Power ON the earbuds
• Charge the battery

Earbuds don't pair with Bluetooth^® device

• On your Bluetooth^® device: Turn the Bluetooth^® feature ON and then OFF. Delete HRS 5017 earbuds from the Bluetooth^® list on your device. Pair again.
• Move your Bluetooth^® device closer to the earbuds and away from any interference or obstructions

SPECIFICATIONS

*A2DP=Advanced Audio Distribution Profile, AVRCP=Audio Video Remote Control Profile, HSP=Handset Profile, HFP=Handsfree Profile.

**Approximate playback time, battery life depends on individual use and may be more or less than specified.

INDUSTRY CANADA NOTICE RSS247

This device complies with Industry Canada license-exempt RSS standard(s).

Operation is subject to the following two conditions:

1. this device may not cause interference, and
2. this device must accept any interference, including interference that may cause undesired operation of the device.

This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of Industry Canada.

IC Number: 255A-8077882

The Bluetooth^® word mark and logos are registered trademarks owned by Bluetooth^® SIG, Inc. and any use of such marks by The Source (Bell) Electronics Inc. is under license. Other trademarks and trade names are those of their respective owners.

THE SOURCE - WARRANTY

The Source warrants that this product will be free from defects in materials and workmanship for a period of one (1) year from the date of purchase. Within this period, simply take the product and your proof of purchase to any The Source store or participating dealer and the product will be replaced (where available) without charge. Any product which has been subject to misuse or accidental damage is excluded from this warranty.

This warranty is only applicable to a product purchased through The Source company-owned stores or participating dealers in Canada where the warranty is included with the product. While this warranty does not confer any legal rights other than those set out above, you may have additional statutory rights which will vary under the laws of the various countries, states, provinces and other governmental entities in which The Source operates. This warranty is subject to all statutory rights you may have in Canada.

Please Recycle

Imported by: The Source,
Barrie, Ontario, Canada, L4M 4W5

Manufactured in China

www.thesource.ca

© 2018 The Source
All rights reserved.