Chamberlain my Q 828EN - Internet Gateway Quick Start Guide

Table of Contents

Contents

1 Introduction
2 Content
3 Connect
4 Create an account
5 Register the internet gateway
6 Add MyQ devices
7 Documents / Resources
- 7.1 References
- 7.2 Download manual

Introduction

Before starting you MUST have:

a router
active internet connection
a free "Ethernet" terminal on your router
internet gateway serial number (on the backside of the device) de of the device)
a pair of photocells connected to the garage door opener. If there are no photocells connecdoor opener. If there are no photocells connected the garage door can only be opened. ted the garage door can only be opened.

To prevent possible SERIOUS INJURY or DEATH:

When the LiftMaster Internet Gateway is used with a garage door opener, the opener MUST ONLY be installed with sectional doors.
Never allow children playing with the garage door, the remote control, wall-switches or any other accessories.
Operate the garage door only when it is technically faultless and the door area is free of obstructions or people.
This product allows operating the garage door without visual control. Therefore the door may execute unexpected travels. Never pass through a closing garage door.
For resindential use only. Only instructed poeple may use this product.
Some parts of the car (doors, trunk lids) may extend into the travel path and cause serious damage to the garage door and/or the car.
The serial number on the backside of this device is for your personal use only. Save this numer from others.
For installation or maintenance work on the device, the plug connection must be easily ACCESSIBLE at all times. Never work on the device when it is connected to the mains supply.

Content

Internet Gateway
USB cable
Power supply unit 230VAC/5VDC with interchangeable plug

Connect

Connect the provided ethernet cable to router. Use the plug valid for your country ( not all odels). Connect power to the internet gateway. When the internet gateway connects to the internet, the green light will stop blinking and will light solid.
Connection Overview

Create an account

Download the myQ App on the App Store or Google Play. Go to "Register" and create an account. If you already have an account, use your username and password.

Register the internet gateway

Select the internet gateway from the list. Enter the Serial Number located on the bottom of the internet gateway when prompted.

Add MyQ devices

Choose a device and follow the instructions on the app.

Note: After you add a device, the blue light on the internet gateway will light up and stay on.

The product is in compliance with the essential requirements and other relevant provisions of the Directives 2014/53/EC, 2014/30/EC. The CE Declaration of Conformity can be obtained from info@chamberlain.com