Assembly Instruction - MADOTI LUNA Assembly Instructions Manual

Assembly instruction

Before using the product, read this document and follow the assembly instructions carefully.
Make sure you are in possession of the following parts:
2xLUNA sides
9xWooden boards for XL model
7xWooden boards for classic model
2xRods
WARNING: Always fasten the screws slowly and firmly, but without fitting them too deeply and tightly. Remember
that the various parts are made of wood, a material that risks breaking if you use too much force. Once the clim-
bing arch is fully assembled, check that all screws are fully secured.
- Mount the climbing arch on a soft surface, such as cardboard or a carpet.
- Remove all packaging material before starting assembly.
- Plan all steps in advance and make sure you have all necessary parts available.
available.
- Always keep hardware tools out of the reach of children.
Step 1
Lay the sides on the floor with the holes facing upwards. It is advisable to mount them on a carpet so as not to scra-
tch the floor and product.
8xScrew per XL
6xScrew per classic
12xRound stickers for XL model
10xRound stickers for classic model
36xPins for XL model
28xPins for classic model
4xSmall screw
EN