Landauer POCKET ANNEALER Instructions Of Use

POCKET ANNEALER
Instruction of use
Pocket Annealer is designed to reset InLight
START-UP
Position the Pocket Annealer with the slot for the dosimeter on the top
as shown on the picture.
Connect the power supply.
Press the start button on the side of the device.
Wait for the warm up (less than 10 seconds),
ANNEALING PROCESS
«Ready» indicates that the annealing can start.
Release the badge in the slot for the dosimeter. The insertion is automatic, do not push the dosimeter.
The display shows «Dosimeter» for an Inlight dosimeter (XA or GA) and «Dosimeter type 2» for a nanoDot.
The annealing starts automatically.
The display shows «Annealing» and the remaining time.
Once it is complete, «Annealing Ended» appears.
The dosimeter goes up automatically.
Positioning of a GA InLight dosimeter
LANDAUER
dosimeters (GA or XA types) and nanoDot
®
01 40 95 62 90
Positioning a nanoDot in its adapter
service@landauer.fr
.
®
Slot
for the dosimeter
Display screen
Start button
Electric
connection
www.landauer.eu