Download Print this page

Water HP02 Quick Start Manual

Download this manual

HP02 QUICKSTART PROGRAMING GUIDE

Page 1 HP02 QUICKSTART PROGRAMING GUIDE...
Page 2 HousePure “What’s Included in Hour Whole Home System?” Parts List (Photos) ....5 HousePure By Pass & In-Service Flow Control (Photos) ............6 HousePure Proper Inlet & Outlet Water Flow Control (Photos) ..........7 HousePure Controller Power Plug location and Drain Connection Location (Photos) ... 8 Water, Inc 704 Kingshill Place ...
Page 3: Control Features
3. Backwash is a rapid upward flow of water that loosens the media bed and flushes particles, dirt and sediment filtered in the bed out to the drain. NOTE! Water should be clear at the end of the (BW) cycle if not repeat until water is clear.
Page 4: User Programming
USER PROGRAMMING The control panel is designed to operate under most conditions with mimimal programming. Follow the procedures below to set up the control for normal operation. See Master Programming section in the Service Manual If custom programming is desired. NOTE: Some items may not be shown depending on control configuration.
Page 5 This option setting is identified by “RT” in the upper left-hand corner of the screen. ***NOTE: A FLASHING TIME OF DAY DISPLAY INDICATES A RECENT LOSS OF POWER. PUSH ANY BUTTON TO CLEAR! Questions ? Please contact Water, Inc. Service Department 1-800-322-9283 F:HousePure Quick/StartHP02 Quick Start Guide 11-02-2-22...