Belkin F5D8001 User Manual page 18

N1 Wireless Desktop Card.doc Page 18 of 35
To start using security, you need to first enable WEP or WPA for your wireless
router (or access point). For Belkin Wireless Routers (or Access Points), these
security features can be configured by using the web-based interface. See your
wireless router's (or access point's) manual for directions on how to access the
management interface.
IMPORTANT: You must now set all wireless network cards/adapters to match these
settings.
Configuring your Card to use Security
At this point, you should already have your wireless router (or access point) set to use WPA or
WEP. In order for you to gain wireless connection, you will need to set your N1 Wireless Desktop
Card to use the same security settings.
Changing the Wireless Security Settings
The Belkin N1 Wireless Desktop Card supports the latest WPA security feature as well as the
legacy WEP security standard. By default, wireless security is disabled.
To enable security, you will first need to determine which standard is used by the router (or
access point). (See your wireless router's or access point's manual for directions on how to
access the security settings.)