MSI 800 User Manual page 54

If you select [Manual], related information is asked to be entered to the following items.
Enter the information directly from the keyboard. This information should be provided in
the documentation from your hard disk vendor or the system manufacturer.
Access M ode
Capacity
Cylinder
Head
Precomp
Landing Zone
Sector
Floppy Drive A
This item allows you to set the type of floppy drives installed. Setting options: [None],
[360K, 5.25 in.], [1.2M, 5.25 in.], [720K, 3.5 in.], [1.44M, 3.5 in.], [2.88M, 3.5 in.]
Halt On
The setting determines whether the system will stop if an error is detected at boot.
Setting options are:
All Errors
No Errors
All, But Keyboard
All, But Diskette
All, But Disk/Key
The settings are CHS, LBA, Large, Auto.
The formatted size of the storage device.
Number of cylinders.
Number of heads.
W rite precompensation.
Cylinder location of the landing zone.
Number of sectors.
The system stops when any error is detected.
The system doesn't stop for any detected error.
The system doesn't stop for a keyboard error.
The system doesn't stop for a disk error.
The system doesn't stop for either a disk or a keyboard
error.
4-7
Chapter 4 - BIOS Setup